Setting The Pedometer; Setting The Watch Functions (Cont.) - Sportline 925 SOLO Manual

SETTING THE WATCH FUNCTIONS

SETTING THE PEDOMETER

The Sportline 925 Solo Heart Rate Watch allows you to set a walking goal and adjust
sensitivity to maximize your workout. By activating the Goal setting, the watch displays
an indicator bar to show the progress you have made on your desired step goal. To
test sensitivity setting, while wearing the watch and walking, watch as the steps are
recorded. If it seems that steps are being missed or over counted, adjust the sensitivity
1 (lowest) - 3 (highest). 2 is the default setting.
In Pedometer Mode,
1. PRESS & HOLD
Sequence.
Turn the Goal indicator ON/OFF by
2.
key.
MODE
Adjust the number of steps for your goal by
3.
adjust the next digit by
the key.
PRESSING MODE
Turn Average Heart Rate Beep ON/Off by
4.
key.
Adjust your sensitivity (1-3) by
5.
key.
MODE
the
6. PRESS & HOLD MODE
15
SP5705IS01ROD.indd Sec1:15 SP5705IS01ROD.indd Sec1:15
the key to enter the Programming
MODE
the S/S key. Set by
PRESSING
PRESSING
the key. Continue through all digits. Set by
PRESSING MODE
PRESSING S/S.
the or
PRESSING S/S R
key to exit the Programming Sequence.
the
PRESSING
the or key. Advance to
S/S R
Set by the
PRESSING MODE
key. Set by the
PRESSING
ADJUST: S/S or R
SET: MODE
6/15/10 1:04 PM 6/15/10 1:04 PM