Table Of Contents; Important Safety Informations; Intended Use - Flex XC3401VRG Instruction Manual

Polisher XC 3401 VRG
Contents
Important safety informations . . . . . . 3
Intended use . . . . . . . . . . . . . . . . . . 4
GENERAL SAFETY RULES
for all power tools . . . . . . . . . . . . . . . 5
SPECIFIC SAFETY RULES
AND SYMBOLS . . . . . . . . . . . . . . . . 7
Overview . . . . . . . . . . . . . . . . . . . . 10
Operating instructions . . . . . . . . . . 11
Maintenance and care . . . . . . . . . . 13
Warranty . . . . . . . . . . . . . . . . . . . . . 14
Technical specifications . . . . . . . . . 15
Meanings of signal words
DANGER
DANGER indicates a potentially
hazardous situations which, if ignored,
could result in death or serious injury.
CAUTION
CAUTION indicates a potentially
hazardous situations which, if not
avoided, may result in minor or moderate
injury, or may cause machine damage.
! NOTE
NOTE emphasizes essential information.
Important safety
informations
Read and understand all of the safety
precautions, warnings and operating
instructions in the Instruction manual
before operating or maintaining this power
tool.
Most accidents that result from power tool
operation and maintenance are caused by
the failure to observe basic safety rules or
precautions.
An accident can often be avoided by
recognizing a potentially hazardous
situation before it occurs, and by observing
appropriate safety procedures.
Basic safety precautions are outlined in
"
the
SAFETY
manual and in the sections which contain
the operation and maintenance
instructions.
Hazards that must be avoided to prevent
bodily injury or machine damage are
identified by WARNINGS on the power
tool and in this Instruction manual.
NEVER use this power tool in a manner
that has not been specifically
recommended by FLEX.

Intended use

!
This hand-operated orbit polisher is
designed
- is designed for industrial applications,
- for all types of polishing work, e.g.
paintwork on vehicles, furniture, metal
and stone surfaces, etc. with polishing
sponge, lambswool and wool pads,
- for use with polishing tools which are
permitted to run at a speed of at least
500 r.p.m.
"
section of this Instruction
3