Download  Print this page

Panasonic NS700 Programming Instruction

Admin programming.
Hide thumbs
   

Advertisement

Panasonic NS700 Admin Programming.
Connecting to PABX for programming Open up Internet explorer or similar browser and browse to
your PABX IP e.g. 192.168.11.241. Enter user: Youruser Password: ***** and Login
To change/add delete speed dials select PBX Configuration, 6. Feature, then System Speed dial.

Advertisement

Table of Contents

   Related Manuals for Panasonic NS700

   Summary of Contents for Panasonic NS700

  • Page 1 Panasonic NS700 Admin Programming. Connecting to PABX for programming Open up Internet explorer or similar browser and browse to your PABX IP e.g. 192.168.11.241. Enter user: Youruser Password: ***** and Login To change/add delete speed dials select PBX Configuration, 6. Feature, then System Speed dial.
  • Page 2 Enter the name and number including 0 for outside line access as per the next screenshot. Don’t forget to Apply any changes made. To modify Extension names or set up buttons select 4. Extension, 1. Wired Extension. From there you can modify the extension names and parameters and set up buttons.
  • Page 3 Similarly selecting 4. Flexible Button will allow addition or reconfiguration of buttons. Note that each extension has it’s own button pattern, patterns once set can be copied to other extensions.
  • Page 4 New Labels can be printed by accessing the TCS website www.telcoms.com.au select Panasonic Support and downloading the appropriate label proforma. Userguides can be found there as well. Once changes are completed and applied click on the disk symbol at the top right of the browser...

Comments to this Manuals

Symbols: 0
Latest comments: