Symbols And Their Meaning; Warnings And Safety Notes, Please Read And Observe - GRAUPNER ULTRA QUICK 70 Operating Manual

Micro-processor controlled high-performance fast charger for ni-cd / ni-mh, lipo / liio / life batteries
Table of Contents

Advertisement

Available languages

Available languages

When charging new batteries you may also encounter problems with premature charge termination. Whenever you wish to use a new battery it therefore
makes sense to carry out a series of monitored test charges, so that you can check that the automatic charge termination circuit works correctly and
reliably with your packs, and charges them to full capacity.
ATTENTION!
This symbol alerts you to the following notes, which users must observe. Ignoring or neglecting any point in these notes may have an adverse effect on the
reliable operation of the device, and the operator's personal safety.
WARNING!
This symbol alerts you to the following notes, with which users must comply. Ignoring or neglecting any point in these notes may have an adverse effect on the
reliable operation of the device, and the operator's personal safety.
This symbol highlights information that should be considered by the user to ensure safe operation of the unit.
This symbol alerts you to notes concerning the proper care of the charger, which users should always observe in order to ensure that the device has an extended
P
useful life.
Protect the charger from dust, damp, rain, heat (e.g. direct sunshine) and vibration. It should only be operated in dry indoor conditions.
This product isn't designed for use by children under the age of 14, it isn't a toy!
The case slots serve to cool the charger, and must not be covered or enclosed; set up the charger with space round it, so that cooling air can circulate unhindered.
Do not connect more than one charger to a multiple-output mains socket - danger of overloading the socket: fi re hazard!
The charger is designed to be powered by a 12 V car battery (11...15 V DC) or power supply or 100 ~ 240V AC main socket only. Select the appropriate output.
Never use both inputs AC and DC at the same time. Never connect an A.C. voltage to the D.C. input (or vice versa)! Fire hazard! It is not permissible to
modify the charger in any way.
Manual ULTRA QUICK 70

2. Symbols and their meaning

3. Warnings and safety notes
23

Advertisement

Table of Contents
loading

Table of Contents