Original Accessories / Attachments; Bringing Into Use; Connecting The Compressed Air Source - Parkside PDSS B2 Operation And Safety Notes

Safety advice / Bringing into use
around or recoil in an uncon-
trolled manner.
For your own safety,
wear suitable personal
protective equipment.
Keep children and other
people away while you
are operating the device.
Distractions can cause you to
lose control of the device.
Disconnect the device from the
compressed air source before
carrying out any repairs or main-
tenance of the device or moving
it to another location.
When removing the hose cou-
pling, hold the hose tightly in
your hand to avoid injury
caused by the hose shooting
backwards.
Look out for damage on
the device. Check the device
for damage before bringing it
into use. Do not use the device if
you discover any defects.
Do not kink the device's hose,
otherwise you may damage it.
NOTE! Observe the safety ad-
vice provided by the manufac-
turer of your inflatable article.
Do not remove rating plates or
labels - they are safety-relevant
parts of the device.
16 GB/IE
If you are inexperienced in the
use of this type of device, you
should seek out information or
training to learn how to handle
it safely.
Original accessories /
Q
attachments
U se only the accessories
and attachments detailed
in the operating instruc-
tions. The use of accessories
other than those recommended
in the operating instructions
could lead to you being in
danger of injury.

Bringing into use

Q
Connecting the
Q
compressed air source
NOTE: Operate the product only with cleaned, conden-
sate- and oil-free compressed air and never exceed the
maximum working air pressure at the device of 8 bar.
NOTE: The compressed air source must be fitted
with a (filter) / pressure reducer so that the air pres-
sure can be regulated.
C onnect the product to a suitable compressed air
source by connecting the quick-release coupling
of the air supply hose with the plug-in nipple
the product. It locks itself in place automatically.
to
4