Technical Data; Safety Advice - Parkside PDSS B2 Operation And Safety Notes

Technical data

Q
Working pressure:
Compressed air quality: Cleaned, oil- and
Volume flow rate:
A-weighted
Sound pressure level (L ): Tyre filling
pa
A-weighted Sound
power level (L ):
wa
Uncertainty:
Values determined in accordance with EN 14462
(EN1953 / A1:2013).

Safety advice

Q
Read all the safety
advice and instruc-
tions. Failure to observe the safety
advice and instructions could result
in serious injury and / or damage
to property.
Keep all the safety advice
and instructions in a safe
place for future reference!
pressure with a suitable
manometer after filling.
Max. 8 bar
condensate-free
Typically
170–300 Ltr. / Min.
device: 85 dB(A)
Blow-out gun: 87 dB(A)
Tyre filling
device: 96 dB(A)
Blow-out gun: 98 dB(A)
K = 3 dB(A)
Check the air
Introduction / Safety advice
FIRE, EXPLOSION AND
DAMAGE TO HEALTH! The
device must be used in well-
ventilated areas only.
INJURY! Never exceed the maxi-
mum allowable working air pres-
sure of 8 bar. Use a pressure
reducer to set the working air
pressure.
RECOIL FORCES! High work-
ing pressures can give rise to
recoil forces that under certain
conditions can result in danger
from continuous loading.
DANGER OF INJURY!
IMPROPER USE! Never point
the device at people or animals.
INJURY! Never use oxygen or
other combustible gas as the
energy source.
INJURY! First disconnect
the hose from the com-
pressed air source and
only then disconnect the
compressed air supply
hose from the device. This
will ensure that the compressed
air supply hose does not wave
RISK OF
DANGER OF
RISK OF
DANGER OF
DANGER OF
GB/IE 15