First time installation
The first time (and only the first time) you switch on your set, you see an installation introduction screen.
The installation procedure consists of a series of screens that guide you through the process.
&
After an introduction screen, you are asked to select a language of the TV's on-screen-menus. (The text of the header and the info on screen
continuously change language.)
é
Press the cursor up/down to highlight your language.
"
Press the
key.
OK
'
Follow the instructions on screen to proceed.
Note: Once you completed the initial installation procedure, you may access the screens from the Settings menu. See p. 8.
Keys at the top of the TV
V
MENU
Should your remote be lost or broken you can still change some of the basic
settings with the keys on the top of your TV.
Press the power switch B to switch the TV on.
Press:
• the V - or + keys to adjust the volume;
• the
P/CH
The
MENU
control.
Use:
B
P/CH
• the V - and + keys and the
items;
• the
MENU
Note:
When activated via the
menu.
Navigate to
- or + keys to select the TV channels or sources.
key can be used to summon the Settings menu without the remote
œ and
P/CH
key to confirm your selection.
key on top of the TV, only
MENU
, press the cursor right and then press the
Exit
o keys to select menu
P/CH
lets you dismiss the
Exit
key.
MENU
3