Select The Menu Language And Country; Store Tv Channels - Philips Cineos 32PF9730/10 User Manual

Installation
Settings
TV
Setup
Installation
OK
Demo
œ
Exit
Info
It is possible that the cable company or the TV channel
displays a broadcast selection menu. Layout and items are
defined by the cable company or the TV channel. Make
your choice with the cursor and press the
Settings
Installation
Language
Country
Automatic installation
Manual installation
Reshuffle/Rename chan
Preferred channels
Manual network installation
Software upgrade
Info
Searching for and storing TV channels is done channel by
channel.
You must go through every step of the Manual
Installation menu.
8
Installation
Language
Country
Automatic installation
π
Manual installation
Reshuffle/Rename channels
Preferred channels
Manual network installation
Software upgrade
OK key.
Installation
Manual installation
Selection mode
System
Channel
Search
Fine tune
Store

Select the menu language and country

& Press the key on the remote control.
MENU
é Use the cursor down to select
"
Use the cursor right to enter the Installation menu.
' Select and enter the list of available languages with the cursor
Language
right.
(
Select your language with cursor up/down and press the
your selection.
§
Select Country with the cursor up/down and enter the list with the cursor
right.
Select the country where you are now located and press the
è
Proceed with the Installation menu.

Store TV channels

After language and country are set correctly, you can now search for and store
the TV channels in two different ways: using Automatic Installation or Manual
Installation (tuning-in channel by channel, see further).
Automatic installation
& Select
Automatic installation
Note: All channels must be unlocked in order to autoprogram. If requested, enter
your code to unlock all channels. (See TV, Features menu, Childlock, p. 17.)
é Press the cursor right to enter the Automatic installation.
The autoprogramming option label
" Press the key.
OK
' Press the green key
Start
The menu screen disappears and the progress of autoprogramming is
displayed.
If a cable system or a TV channel which broadcasts ACI (Automatic Channel
Installation) is detected, a programme list appears.Without ACI broadcast,
the channels are numbered according your language and country selection.
You can use Reshuffle to renumber them. See p. 9.
Manual installation
&
Select Manual installation
é Use the cursor right to enter the Manual installation menu.
"
Select Selection mode .
Select either the frequency band, the C-channel option for aerial channels
or the S-channel option for cable channels.
'
Press the cursor down to select
Select your country or part of the world where you are now located.
(
Press the cursor down to select
Enter or select the number where you would like to store the TV channel.
§ Press the cursor down to select
The frequency or the C- or S-channel number increases until the TV
channel is found.
Note: If you know the frequency, the C- or S-channel number, enter the 3 or 2
digits of the frequency or the channel number directly with the digit keys 0 to 9
(e.g. 048).
è
Press the cursor down to select
Adjust the frequency with the cursor up/down in case of poor reception of
the channel found.
!
Press the cursor down to select
Press the cursor right and store the channel found with the
( !
Repeat steps to to search for another TV channel.
in the Settings menu.
Installation
in the Installation menu.
Start now appears.
to start autoprogramming.
in the Installation menu.
System .
Channel.
.
Search
.
Fine tune
Store.
key to confirm
OK
key.
OK
key.
OK