Tips - Philips Cineos 32PF9730/10 User Manual

Tips

Symptoms
Poor Picture
No Picture
No photo, music
or video play or in
poor quality only
Digital distortion
No sound
Good sound but poor
colour or no picture
No solution found
for your picture or
sound problem ?
Remote control
Standby
No stable or not
synchronised VGA
picture
Control of
peripheral equipment
België / Belgique
070 222 303
Danmark
3525 8759
Deutschland
0180 5 356 767
France
08 9165 0005
E§§A™
0 0800 3122 1280 ¢ˆÚ¿Ó
España
902 888 784
36
Items to Check and Actions to follow
• Have you selected the correct TV system in the manual installation menu?
• Is your TV or house aerial located too close to loudspeakers, non-earthed audio equipment or neon
lights, etc.?
• Mountains or high buildings can cause double pictures or ghost images.
Sometimes you can improve the picture quality by changing the direction of the aerial.
• Is the picture or teletext unrecognisable? Check if you have entered the correct frequency.
See Installation, Manual installation, p. 8.
• Are the supplied cables connected properly ? (The aerial cable to the TV, the other aerial to your
recorder, the power cables.)
• Has the child lock been switched off ?
• In case of weak or bad signal, consult your dealer.
• Check if you selected the correct source.
• Check if the source complies with a supported code.
• The low quality of some digital picture material may be the cause of digital image distortion. In this case
select the Soft setting using the Picture menu, Smart Picture, without changing the picture settings
manually.
• Select Digital STB in the Source menu (p. 13) to automatically switch to the Soft setting.
• No sound on any channel? Check the volume isn't at minimum.
Is the sound interrupted with the mute key ¬?
•
• Adjust the contrast, colour, tint and brightness setting.
Try another smart picture setting.
Switch your TV off and then on again once. Never attempt to repair a defective TV yourself.
Check with your dealer or call a TV technician.
• Check if the remote control is in the correct mode.
• If your TV no longer responds to the remote control, the batteries may be dead.
• You can still use the
MENU
Your TV consumes energy in the standby mode. Energy consumption contributes to air and water pollution.
Power consumption: < 1 W
• Check if you have selected the correct VGA mode in your PC.
• See HDMI connector, p. 28.
The infrared signals of the screen may influence the reception sensibility of other peripherals
Solution: replace the batteries of the remote control of other peripheral equipment.
E.g. keep away a wireless headphone from within a radius of 1 meter.
Ireland
0.17/min 01 601 1777
Italia
Local 199 404 041
Luxembourg
0.12/min 40 6661 5644
Nederland
0.23/min 0900 8407
Norge
2270 8111
Österreich
0820 901114
0.15/min
key and the -/+ keys on top of your TV.
Portugal
Local 2 1359 1442
Schweiz / Suisse / Svizzera
0.25/min 0844 800 544
Svenska
Local 08 5792 9100
Suomi
0.20/min 09 2311 3415
United Kingdom
Local 0906 1010016
0.20/min
Local
Local
Local
Local
£0.15/min