Dvd Player Or Other Peripheral Digital Source Equipment - Philips Cineos 32PF9730/10 User Manual

DVD Player or other peripheral digital source equipment

Equipment with Component Video Output Connectors (YPbPr)
Connect the three separate component video cables 1 to the peripheral equipment having component video outputs (YPbPr), such
&
as DVD-players, laser-disc players, videogame players, satellite receivers or other equipment, and to the
on the TV.
Note: should always be used together with digital audio.
EXT4
Connect the audio cable 2 to the
é
connectors of the TV.
Notes
- If necessary, you can adjust the picture position to the centre of the screen with the cursor keys.
- The labels for the component video sockets may differ depending on the DVD player or the peripheral equipment connected. Although the
abbreviations may vary, the letters B and R stand for the blue and red component signals, respectively, and Y indicates the luminance signal. Refer
to the DVD player's or peripheral equipment instructions for use for definitions and connection details.
- This television is designed to accept high definition signal standards 480p, 576p, 720p and 1080i as specified by the Electronic Industries
Association standard EIA770.3.
Digital peripheral equipments from different manufacturers have the possibility of differing output standards which may cause difficulties for the
television to properly display.
Warning : in case you notice scrolling images, wrong colours or no colour, no picture, or even combinations of these on your screen, check if the
connections are done in the correct way or move your digital equipment further away from your TV.
26
DIGITAL AUDIO
AUDIO
ANTENNA
L
OUT
IN2 IN1
HDMI DVI
75
NETWORK
R
EXT 1
Pr Pb Y
EXT 4
1
YPbPr
....
....
of the peripheral equipment and to one of the
DIGITAL AUDIO OUT
AUDIO
L
R
EXT 2 EXT 3 OUT
DIGITAL
AUDIO
IN 1/2
2
, and jacks of
Y Pb Pr EXT4
DIGITAL AUDIO IN