Philips Cineos 32PF9730/10 User Manual page 53

Wireless station TV.eps
Re-securing your wireless network
Also see Annex 2:Wireless network security, p. 12.
Consult the user manual of your Wireless Access
&
Point to apply its security setting according to the
details you wrote down earlier.
• Switch off the SSID broadcast.
• Switch on wireless security (WEP/WPA keys).
Note: If you don't have your WEP/WPA keys you will
need to create new ones and apply them to all wireless
devices connected to your wireless network.
é Disconnect your PC from your network.
• In case of a wireless USB dongle, remove the
dongle from your PC.
• In case of an integrated wireless network adapter
(e.g. laptop PC), disable the network adapter.
• In case your PC has a wired connection, unplug the
Ethernet cable from your PC.
" Connect the wireless Ethernet bridge to your PC.
' Consult the user manual supplied with the wireless
Ethernet bridge to configure your device according
to your current wireless network settings.
If your PC can connect to the Internet using a web
browser, the wireless Ethernet bridge is configured
correctly.
Note: After configuring your wireless Ethernet bridge you
may need to wait a while before the connection is
active.You may even have to restart the bridge.
Disconnect your wireless Ethernet bridge from the
(
PC and connect it to the
the bottom of your TV.
§ Reconnect your PC to your network.
Note: Also switch on the wireless security (WEP/WPA
keys) of your wireless PC driver.
connection at
NETWORK
11