Table of Contents
Advertisement
Settings
TV
Picture
Sound
Ambilight
Features
Info
Settings
Ambilight
Ambilight
Brightness
Mode
Colour
Separation
Balance
Info
Settings
Ambilight
Ambilight
Brightness
Mode
Colour
Separation
Balance
Info
Smart colour modes:
•
Personal
: Select any colour or hue to match to
your personal taste, e.g. your interior, the
programme content (sports, movie, etc.), the
mood you are in, etc.
•
:The colour is matched to that of
Warm white
most normal lightbulbs. Select this setting if you
want the Ambilight to fit best with normal living
room lighting.
•
Cool white
:The colour is matched to that of
normal daylight (6500K). Select this setting if
you prefer more cool lighting.
Note: the 6500 K is the SMPTE recommended
setting for ambient backlighting of displays.
•
Blue
:The blue colour is preferred by most
consumers to create a cool, modern and /or
mystical atmosphere. Select this setting
according to your personal taste or mood.
18
Ambilight menu
Ambilight
Ambilight is an innovative lighting concept using light with fully adjustable
Ambilight
colours at the back of the TV to enhance the viewing experience. Analysis of
the picture content adapts the colours continuously, or the lights can be set to
Brightness
any fixed colour and many shades of white. Ambilight creates the ideal viewing
Mode
environment for your TV resulting in improved relaxed viewing, improved
Colour
perceived picture detail, contrast and colour.
Separation
In standby mode the lights can be set/operated to any colour and create a
unique ambiance in the room.
Balance
&
é
"
Mode
'
Colour
(
Ambience
Relaxed
Movie
Action
Colour
Smart colour
Palette
Saturation
§
è
!
Ambilight in Standby mode
Note: Infrared interference
To avoid bad infrared remote control reception, place your peripheral
equipments out of sight of the ambient lights of your TV.
Note: Ambilight does not function well when the room temperature is less than
59°F/15°C.
Select
Ambilight
in the TV menu.
Press the cursor right to enter the Ambilight menu.
Select Ambilight and press the cursor right to select
•
Off
: will switch off the ambient lights and downlight all other ambilight
menu items.
•
On
: the ambient lights will be on. Refine the light settings in the menus
below.
Select
to adjust the light output of the ambient lights.
Brightness
Select
Mode
and press the cursor right to select
,
or
.
Relaxed
Movie
Action
•
: this will show constant light according to the settings in the
Colour
Ambilight colour menu. See below.
• The options
,
Ambience
Relaxed
match brightness and colour to the screen content.
The mode selection made will effect the speed and/or saturation and/or
intensity which determines the viewing impression.
E.g. in
Relaxed
mode, the rate of brightness and colour change is
smoothly and soft which gives you a more immersive yet relaxed viewing.
is the rate of brightness and colour change as predefined in
Ambience
the factory.
will influence the perception of a movie whereas
Movie
influence the dynamic impression.
Notes:
- The rate of change is limited, as not to cause uncomfortable sensations.
- According to the selection made, some Ambilight menu items will be downlighted
and can not be selected.
In case
has been selected in the Mode menu:
Colour
• Select
Colour
in the Ambilight menu and press the cursor right.
• Select
and then select
Smart colour
white
or
Blue
.
• Select
to select the general colour of the light output.
Palette
• Select
to adjust the colourfulness of the light.
Saturation
Notes:
- Adjusting the Palette and/or Saturation settings will set the colour mode to
Personal.
- The selected colour mode will be the one used when turning on the ambient
lights from standby mode.
In case
Ambience
,
Relaxed
,
Mode menu:
• Select
in the Ambilight menu and press the cursor right.
Separation
• Select
Off
for a mono behaviour which means that all lamps will behave
equally.
• Select
,
Minimum
Medium
effect over the available lamps.
Select
and use the cursor left/right to adjust and generate any
Balance
colour and level of light intensity on the left and right side of the picture to
perfectly match your room setup.
When the TV is switched off, the ambient lights will also be switched off.
When the TV is in standby mode, ambilight can be used to provide a unique
ambience for the room. Press the
remote control (see p. 4) to switch between Ambilight Off or On.
or
Off
Colour
,
Ambience
,
and
will dynamically
Movie
Action
Action
,
Personal
Warm white
Movie
or
Action
has been selected in the
or
to define the Ambilight stereo
Maximum
key on the
AMBILIGHT ON/OFF
.
On
,
mode will
,
Cool
Advertisement
Table of Contents
