Suzuki SL-1 Owner's Manual page 24

5. Stop Recording - Press the PLAY/STOP button, the REC button or the recording track
button to stop recording. The REC indicator turns off and the recorded track indicator is lit to
show the track now contains data.
Note: When the record memory is full, recording will stop automatically and "FUL" will appear on
the LED display.
Playback
1. The Track LED indicators will show which tracks contain recorded data. If you do
not wish to hear one of the two Tracks, press the corresponding TRACK button to
turn that track off. Its LED indicator will turn off.
2. Press the PLAY/STOP button to hear the recorded track(s). The PLAY indicator lights up
and the beat indicators will flash per the beat pattern and tempo.
You can change the tempo of your recorded track by pressing the TEMPO button while
the recording is being played back.
You may also accompany the recorded tracks on the keyboard while the recording is playing back.
Note: If the metronome is turned on before pressing the PLAY/STOP button to play back the recorded music,
the metronome will sound with proper tempo and beat pattern which performed during your recording.
3. Press the PLAY/STOP button to stop the playback.
Playback will also stop automatically when the recording reaches its end.
In step 2, you can change the tempo of the track that is playing back temporarily. You
could also change the tempo for the recorded tracks permanently:
• Adjust the new tempo value
• Hold the REC button and press the PLAY/STOP button
Tracks will playback at the new tempo and this tempo will be set for the tracks. Beat pattern cannot be
changed.
Recording over the tracks
To erase the music recorded on the tracks; just record over the track you want to erase
24
PLAY/STOP
TRACK 1 TRACK 2
PLAY/STOP
PLAY/STOP
O W N E R ' S M A N U A L