Suzuki SL-1 Owner's Manual page 18

Digital studio piano
Table of Contents

Advertisement

Split Point
Changing The Split Point For Lower Voice
When the lower mode is engaged the keyboard is divided into two parts at the "split point. "
In the right hand section the original or Upper voice will sound. In the left hand section a new instrument
voice can be assigned, the "lower" voice. The split point for the Lower section can be changed in this Set
Up Function mode.
+/YES
1. Press the SETUP button until the "Split Point?" menu appears.
The current voice split point will be shown.
2. Use the +/YES button to shift the split point up the keyboard, to the right, and the –/NO button to shift
the split point down the keyboard, to the left.
The Split Point is from C1 to C8.
Press the +/YES, –/NO buttons simultaneously to recover the default setting of Gb3.
3. To Exit the Set UP Mode press the set up button again or it will exit from set up mose automatically 5
seconds after it has been engaged.
Touch
The piano offers four types of keyboard touch sensitivity settings, soft, normal, hard, and fixed. These are
also known as velocity settings and are designed to suit your style of playing.
+/YES
The normal setting is selected automatically when the piano is turned on. The touch response can be
changed with the function feature.
Soft is the most sensitive keyboard response which permits maximum sound levels with a light touch.
Normal is an intermediate response suitable for most styles of music. Normal is the default setting.
Hard is a less sensitive keyboard response which requires a heavier touch to obtain maximum sound
levels.
Fixed does not offer any touch sensitivity. Each key plays at full volume no matter how hard the piano
key is hit. It is commonly used on Harpsichord and Organ voices.
1. Press the SETUP button until the "Touch" menu appears.
2. Press the +/YES button to confirm your selection. The current touch response setting will be shown.
3. Use the +/YES, –/NO buttons to select your desired touch response.
4. To Exit the Set UP Mode press the set up button again or it will exit from set up mode automatically 5
seconds after it has been engaged.
18
O W N E R ' S M A N U A L

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents