Application; Safety Precautions; Faults And Damage - Ecom Instruments X.COM 21x -Ex Safety Instructions

1. Application

The X.com 21x –Ex is an explosion-shielded, water-, dust- and
impact-resistant mobile phone for industrial application in areas
with an increased risk of explosion in zone 2 in accordance with
directive 1999/92/EC (ATEX 137) and 94/9/EC (ATEX 95).

2. Safety precautions

These operating instructions contain information and safety
regulations which are to be observed without fail for safe operation
in the described conditions. Non-observance of this information
and these instructions can have serious consequences or it may
violate regulations.
Please read these operating instructions carefully before starting
to use the unit! In the event of conflicting information the details
specified in the safety precautions shall apply.
In case of any doubt (in the form of translation or printing errors)
the German version shall apply.

3. Faults and damage

If there is any reason to suspect that the safety of the unit has
been impaired, it must be withdrawn from use and removed
immediately from the Ex-area. Measures must be taken to prevent
it from being restarted accidentally.
The safety of the unit may be compromised, if, for example:
- there is visible damage to the housing.
- the unit has been subjected to excessive loads.
- the unit has been improperly stored.
- the unit has been damaged in transit.
- unit markings or inscriptions are illegible.
- malfunctions occur.
- permitted limit values have been exceeded.
13