LightBug Pro User Manual page 73

Is the tracker indoors? If the tracker is indoors more
-
power will be used as the tracker will try to look for
a GPS fix before attempting to locate itself via WPS
or GSM. Find out more about this under
location technologies work
Make sure you have
-
where applicable
Motion sensitivity: it might be that your tracker is
-
sending more location updates than it should
because the motion sensitivity is too high. This
usually occurs when the tracker is stationary but still
sending location update. Reduce the motion
sensitivity via your
Lightbug User Manual
section
WiFi and GPS Safe Zones
advanced configurations
the How the
set up
page.
Page 73 of 73