How To Apply Updates; Settings Pending; Applying Your Settings - LightBug Pro User Manual

How to Apply Updates

Updates should be applied automatically but in some cases
you will need to keep your tracker on charge.
To confirm the update has been applied, the "Firmware
update pending" message should no longer appear.
Caution: If your tracker LED (far left) is flashing continuously
and the tracker is not responding it means the update is
being downloaded and applied. We strongly advise you to
place your tracker on charge in such a case.

Settings Pending

After selecting new settings you may notice the following
message:

Applying Your Settings:

The new settings will be applied automatically the next time
the tracker connects to send a new location update but you
can speed up the process by pressing the tracker button for
1-3 seconds.
Page 70 of 73
Lightbug User Manual