Step 3: Setting Up Motion And Fall Detection; Step 4: Setting Up Wake Mode Update Interval - LightBug Pro User Manual

Caution: When the tracker is inside this safe zone, it will only
report according to its sleep interval settings.

Step 3: Setting up motion and fall detection

Enabling motion detection will unlock wake mode update
interval. Disabling this option will only allow you to set up
sleep mode interval.
The fall detection feature alerts you when the tracker has
been dropped or the person wearing it has fallen.
Note: Enabling the fall detection feature will automatically
create an alert. If you wish you turn off the alert please refer
to the Alerts Section.

Step 4: Setting up wake mode update interval

This step allows you to configure how often you want the
tracker to update its location when it is moving outside the
safe zones.
Page 21 of 73
Lightbug User Manual