Setting Up Your Tracker; Charging Your Tracker Before Initial Use; Charging Your Lightbug Zero; Charging Your Lightbug Pro - LightBug Pro User Manual

Setting up your tracker

This section will highlight how to activate your tracker.

Charging your tracker before initial use:

You will need to charge your tracker as follows before initial
use:
The LightBug Zero needs to be charged for at least 2 hours
The LightBug Pro needs to be charged overnight

Charging your LightBug Zero:

The LightBug Zero is charged via any standard USB cable
either via wall adapter or via USB port.
It is advisable to use an adapter plugged into a power socket
rather than using a computer USB port or similar.
A full charge should be achieved in 2 hours. The LED
indicators on the LightBug Zero will turn off when it is
fully charged.

Charging your LightBug Pro:

The LightBug Pro can be charged via any standard Qi
Wireless Charging Pad.
Charging times vary depending on the wireless charger that
is being used so it is advisable to keep your LightBug Pro
charging overnight before initial use.
Page 7 of 73
Lightbug User Manual