SOS / Force update – 1 to 3 second button
press
Pressing the button for 1 to 3 seconds will force the tracker
to connect, update settings and download any firmware
updates.
This will also trigger an SOS alert if configured to do so via
the LightBug App.
This mode will turn on the LEDs in a sequence from left to
right.
Device Reset – 10 second button press
If for any reason your tracker is not responding or is
behaving oddly, you can reset your tracker by pressing and
holding the button for 10 seconds.
Hint: Performing this reset will not affect your settings.
How Things Work Under the Hood
How the Location Technologies Work
LightBug trackers utilize three location technologies in this
order:
Page 68 of 73
Lightbug User Manual
Need help?
Do you have a question about the Pro and is the answer not in the manual?