Symantec NetBackup 5000 Replacement Manual page 5

4.
Figure 1-3 Selecting Date and Time
5.
Figure 1-4 Setting the time zone
6.
NBU 5000 Chassis Replacement Guide v. 1.3
NetBackup 5000 Chassis Replacement v. 1.3
Use the arrow keys to locate System and Date and Time, and then press
Enter.
On the Clock and Time Zone interface, Under Time and Date, select
Change ..., and then press Enter.
In the Change System Date and Time interface, set the date and time as
required, click Apply, and then press Enter.