Using The Advanced Audio Settings Features; Using The Srs Wow ™ Surround Sound Feature; Using The Virtual Surround Sound Feature (Dolby ® Virtual And Srs Trusurround ™ ) - Toshiba REGZA 42LX177 Owner's Manual

Using the advanced audio settings
features
Using the SRS WOW ™
feature
™
SRS WOW is a special combination of SRS Labs audio
technologies (SRS 3D, SRS Focus, and SRS TruBass) that
creates a thrilling surround sound experience with deep, rich
bass from stereo sound sources. Your TV's audio will sound
fuller, richer, and wider.
™
To adjust the WOW settings:
1
Put the TV in STEREO mode (- "Selecting stereo/SAP
broadcasts" on page 64).
Press Y and open the Audio menu.
2
Highlight Advanced Audio Settings and press T.
3
4
Press b or B to highlight the WOW feature you want to
adjust, and then press C or c to adjust the item.
Advanced Audio Settings
WOW: SRS 3D
WOW: SRS Focus
WOW: SRS TruBass
Dolby Virtual
SRS TruSurround
Reset
WOW: SRS 3D — To turn the surround sound effect
•
On or Off.
Note: If the broadcast is monaural, the SRS 3D effect
will not work.
WOW: SRS Focus — To turn the vocal emphasis effect
•
On or Off.
WOW: SRS TruBass — To select the desired bass
•
expansion level (Off, Low, or High).
To save the new settings, highlight Done and press T.
5
To revert to the factory defaults, highlight Reset and
press T.
WOW, TruSurround, SRS and l symbol are trademarks of SRS Labs,
Inc.
WOW and TruSurround technologies are incorporated under license
from SRS Labs, Inc.
84
Chapter 7: Using the TV's advanced features
surround sound
Off
Off
Low
On
Done
Using the virtual surround sound feature
(Dolby ® Virtual and SRS TruSurround
The Dolby Virtual and SRS TruSurround feature allows you to
enjoy virtual surround sound from the TV's speakers.
To turn on the Dolby Virtual and SRS TruSurround
feature:
Press Y and open the Audio menu.
1
Highlight Advanced Audio Settings and press T.
2
3
In the Dolby Virtual and SRS TruSurround field,
select On.
Advanced Audio Settings
WOW: SRS 3D
WOW: SRS Focus
WOW: SRS TruBass
Dolby Virtual
SRS TruSurround
Reset
To save the new settings, highlight Done and press T.
4
To revert to the factory defaults, highlight Reset and
press T.
To turn off the Dolby Virtual and SRS TruSurround
feature:
Select Off in step 3 above.
Note: The Dolby Virtual and SRS TruSurround and WOW
SRS 3D features cannot be on at the same time. If you set one
to On, the other will automatically be set to Off.
™ )
Off
Off
Low
On
Done