Using Mpeg Noise Reduction; Using The Game Mode Feature; Using The Advanced Audio Settings Features; Using The Surround Feature - Toshiba 32DT1U Owner's Manual

the menu will display the text "CableClear" .
The available selections are Off, Low, Middle,
and High.
• If the current input is ColorStream HD, HDMI 1,
HDMI 2 or HDMI 3(only for 40"), the menu will
display the text "DNR." The available selections
are Off, Low, Middle, and High. Low, Middle,
and High will reduce the noise in varying
degrees, from lowest to highest, respectively.
3無
To save the new settings, highlight Done and
press .
To revert to the factory defaults, highlight Reset
and press .

Using MPEG noise reduction

The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression.
Choices for MPEG noise reduction are Off, Low,
Middle, and High. Off is automatically selected when
this feature is disabled ("grayed out").
To select the MPEG noise reduction level:
1無
Press and open the Picture menu.
2無
Highlight Noise Reduction and press
3無
Press p or q to highlight the MPEG Noise
Reduction field, and then press t or u to select
either Off, Low, Middle or High.
4無
To save the new settings, highlight Done and
press .
To revert to the factory defaults, highlight Reset
and press .

Using the Game Mode feature

You can use the Game Mode feature for shorter frame
delays when playing a video game requiring split-second
timing between the on-screen display and input from the
controller (such as music creation and high-action games).
This feature is more effective for 480i and 1080i input
signals.
Note: To use the Game Mode feature, the current
video input must be VIDEO, ColorStream HD,
HDMI 1, HDMI 2 or HDMI 3(only for 40"). The
Game Mode cannot be turned on when any other
video input is selected.
To turn on Game Mode:
1無
Press and open the Picture menu, highlight
the Game Mode.
2無
Press t or u to select On.
48
Chapter 7: Using the TV's advanced features
.
To turn off Game Mode:
Select Off in step 2 above, change the video input, or
turn the TV off and then on again.
Note: You can change the video input by
pressing on the remote control
( page 28).
Using the advanced audio
settings features

Using the Surround feature

To change the Surround settings:
1無
Press and open the Sound menu.
2無
Highlight Advanced Audio Settings and press
.
3無
Press p or q to highlight the Surround feature,
and then presst or u to turn the Surround effect
On or Off.
4無
To save the new settings, highlight Done and
press .
To revert to the factory defaults, highlight Reset
and press .

Using the 7 Bands Equalizer feature

To select the 7 Bands Equalizer level:
1無
Press and open the Sound menu.
2無
Highlight Advanced Audio Settings and press
.
3無
Turn On the 7 Band Equalizer, then press
Equalizer Setting.
4無
Press p or q to highlight the Equalizer Setting
feature, and then press p qt u to change the
Equalizer Setting effect from 100Hz to 10KHz.
5無
To save the new settings, highlight Done and
press .
To revert to the factory defaults, highlight Reset
and press .
Note:
• When 7 Band Equalizer is On, Bass and
Treble will be gray out.
• When 7 Band Equalizer is Off(Default),
Equalizer Setting is disable.
into