Yamaha MT07 TRACER Owner's Manual page 40

Instrument and control functions
With the engine turned off:
1. Move the sidestand down.
2. Make sure that the start/engine stop
switch is set to "
3. Turn the key on.
4. Shift the transmission into the neutral
position.
5. Slide the switch toward "
Does the engine start?
3
YES
With the engine still running:
6. Move the sidestand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the sidestand down.
Does the engine stall?
YES
After the engine has stalled:
10. Move the sidestand up.
11. Keep the clutch lever pulled.
12. Slide the switch toward "
Does the engine start?
YES
The system is OK. The motorcycle can
be ridden.
".
".
NO
NO
".
NO
3-26
WARNING
If a malfunction is noted, have a
Yamaha dealer check the system
before riding.
The neutral switch may not be working
correctly.
The motorcycle should not be ridden
until checked by a Yamaha dealer.
The sidestand switch may not be
working correctly.
The motorcycle should not be ridden
until checked by a Yamaha dealer.
The clutch switch may not be working
correctly.
The motorcycle should not be ridden
until checked by a Yamaha dealer.