Helmet Holding Cable - Yamaha MT07 TRACER Owner's Manual

Helmet holding cable

The helmet holder is located under the
seat. A helmet holding cable is provid-
ed in the owner's tool kit to secure a
helmet to the helmet holder.
To secure a helmet with the helmet
holding cable
1. Remove the seat. (See page 3-20.)
2. Pass the helmet holding cable
through the buckle on the helmet
strap buckle as shown, and then
hook the cable loops over the hel-
met holder.
1
2
3
ZAUM1408
1. Helmet strap buckle
2. Helmet holding cable
3. Helmet holder
3. Place the helmet on the left or the
right side of the vehicle or on the
top of the fuel tank, and then in-
stall the seat. WARNING! Never
ride with a helmet attached to
the helmet holder, since the hel-
met may hit objects, causing
loss of control and possibly an
accident.
[EWA10162]
Instrument and control functions
EAUM3800 To release the helmet from the hel-
met holding cable
Remove the seat, remove the helmet
holding cable from the helmet holder
and the helmet, and then install the
seat.
3-21
3