Connecting A Vcr; Connecting A Cable Converter Box - Toshiba 46H84C Owner's Manual

Connecting a VCR

This connection allows you to watch local channels and video
programs, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
You will need:
• two coaxial cables
• one set of A/V cables
From Cable Box or Antenna
Stereo VCR
IN from ANT OUT to TV
CH 3
CH 4
VIDEO
TV

Connecting a cable converter box

This connection allows you to watch basic and premium cable channels.
To watch basic cable and use the TV's features, select ANT-1. To view
premium channels, select ANT-2, tune the TV to channel 3 or 4
(whichever channel is vacant in your area), and use the converter box
to change channels.
You will need:
• three coaxial cables
TV
IN
OUT
L R
AUDIO
From Cable
OUT IN
Cable converter box
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a VCR with S-video, use an S-
video cable (in the S-video jacks) instead of
the standard video cable.
Do not connect a standard video cable and
an S-video cable to Video-1 (or Video-2) at
the same time, or the picture performance
will be unacceptable.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
Note:
When you use a converter box with your TV,
the remote control will not operate some
features, such as programming your favorite
channels, labeling channels, and locking
channels.
9