Connecting A Dvd Player With Colorstream (Component Video) And A Vcr - Toshiba 46H84C Owner's Manual

Connecting a DVD player with ColorStream
(component video) and a VCR
This connection allows you to watch DVD, VCR, and TV programs,
and record TV programs.
®
Your TV has ColorStream
your TV to a DVD player with component video inputs (such as a
Toshiba DVD player with ColorStream
quality and realism.
– To record one TV program while watching another TV program,
tune the VCR to the channel to record, and tune the TV to the
channel to watch.
– To record a TV program while watching a DVD, tune the VCR to
the channel to record, and select ColorStream HD1 on the TV (see
"Selecting the antenna input" on page 23).
You will need:
• two coaxial cables
• one set of A/V cable
• one pair of audio cable
• one set of component video cables (one S-video cable for a DVD
player without component video inputs; see notes at right)
From
Antenna
IN from ANT OUT to TV
CH 3
CH 4
VIDEO
TV
Y P
B
S-VIDEO COMPONENT VIDEO
DVD player with component video
12
(component video) inputs. Connecting
® ) can greatly enhance picture
Stereo VCR
IN
OUT
L R
AUDIO
AUDIO
OUT
L L
P
R
R R
VIDEO
OUT
®
Note:
For the highest possible picture quality, use
component video cables (or a HDMI cable)
between the TV and DVD player.
You can connect the component video cables
to either set of the ColorStream jacks on the
TV (HD1 or HD2).
For HDMI connection, see page 15.
The ColorStream HD1/HD2 and HDMI jacks
can be used with Progressive (480p, 720p)
and Interlaced (480i,1080i) scan systems;
however, a 1080i signal will provide the best
picture performance.
If your DVD player is not compatible with
component video or HDMI, use the S-video
connections (plus the standard audio
connections) instead (see page 11).
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.