Connecting Two Vcrs; Connecting A Camcorder - Toshiba 46H84C Owner's Manual

Connecting two VCRs

This connection allows you to record (dub/edit) from one VCR to
another VCR while watching a videotape. You can also record from
one TV channel while watching another TV channel.
You will need:
• two coaxial cables
• two sets of A/V cables
From
Antenna
VCR1
IN from ANT OUT to TV
CH 3
CH 4
VIDEO
TV
VCR2
*
VIDEO
CH 3
CH 4

Connecting a camcorder

This connection allows you to watch video materials recorded on a
camcorder.
You will need:
• one set of A/V cables
14
IN
OUT
L R
AUDIO
**
AUDIO
L R
IN
OUT
Camcorder
VIDEO AUDIO
OUT
L
R
L/MONO R
S-VIDEO VIDEO
AUDIO
Video-3 (front panel)
Note:
If you have VCRs with S-video, use S-video
cables instead of standard video cables for
better picture performance. Do not connect
both a standard video cable and an S-video
cable to Video-1 (or Video-2) at the same
time, or the picture performance will be
unacceptable.
Do not connect the same VCR to the output
and input jacks on the TV at the same time.
To dub or edit, VCR 2 must select Line IN,
and the TV must select VIDEO 1 (see
"Selecting the antenna input" on page 23).
* The Video OUT jack does not output the
POP picture.
** The Audio OUT jacks can output the sound
of either the Main or POP picture (see
"Selecting the Audio OUT sound" on page
56).
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
Note:
If you have a camcorder with S-video, use an
S-video cable instead of a standard video
cable for better picture performance. Do not
connect both a standard video cable and an
S-video cable at the same time, or the picture
performance will be unacceptable.