Connecting A Hdmi Device To The Hdmi Input - Toshiba 46H84C Owner's Manual

Connecting a HDMI device to the HDMI input

HDMI (High Definition Multimedia Interface) is the first all digital
1
consumer electronics A/V interface that supports an uncompressed
standard. One jack supports both video and audio information.
The HDMI input on your TV is designed to accept HDMI program
material in digital form from EIA/CEA-861/861B–compliant
consumer electronic devices, such as a set-top box or DVD player
equipped with a HDMI or DVI output connection.
Applicable video signals
No. of dots (H× × × × × V)
1080i 1920×1080i
720p 1280×720p
720×480p
480p 640×480p
480i 720×480i
Note: This TV is not intended for connection to
and should not be used with a PC (personal
computer).
You will need:
• one HDMI cable (this HDMI connecter is type A.)
Note: For proper operation, the HDMI cable length
should not exceed 3m (9.8 ft). The recommended
length is 2m (6.6 ft).
HDMI device
(for example, set top box or DVD player)
VIDEO AUDIO
L R
IN
OUT
TV
2
3
Vertical frequencies
59.94/60Hz
59.94/60Hz
59.94/60Hz
59.94/60Hz
HDMI OUT
Notes:
1
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC.
2
EIA/CEA-861/861B compliance covers the
transmission of uncompressed digital
video with high-bandwidth digital content
protection, which is being standardized for
future reception of high-definition video
signals.
3
Consult your consumer electronics dealer
for availability.
Caution:
To ensure that the HDMI device is reset
properly, it is recommended that you follow
these procedures:
• When turning on your electronic
components, turn on the TV first,
and then the HDMI device.
• When turning off your electronic
components, turn off the HDMI device
first, and then the TV.
15