Selecting The Video Input Source; Labeling The Video Input Sources - Toshiba 46H84C Owner's Manual

Selecting the video input source

Press the TV/VIDEO on the remote control or the TV to view a signal
from another device connected to your TV, such as a VCR or DVD
player (see illustrations below). You can select ANT 1, VIDEO 1,
VIDEO 2, VIDEO 3, ColorStream HD1, ColorStream HD2, HDMI,
or ANT 2 depending on which input jacks are used for connecting the
devices (see "Connecting your TV" on page 8).
SOURCE SELECT I ON
0 :
ANT 1
1 : V I DEO 1
2 : V I DEO 2
3 : V I DEO 3
4 : Color Stream HD1
5 : Color Stream HD2
6 :
HDM I
7 :
ANT 2
0- 7 TO SELECT :
Pressing TV/VIDEO on the remote
control displays the current signal
source (press TV/VIDEO again or
0-7 to change)

Labeling the video input sources

The video label feature allows you to label each input source for your
TV from the following preset list of labels:
– – – : Uses the default label name
VCR : Video cassette recorder
DVD : DVD video
DTV : Digital TV set-top box
SAT : Satellite box
CBL : Cable box
To label the video input sources:
1. Press MENU, and then
press x or • until the
CUSTOM menu appears.
2. Press y or z to highlight
VIDEO LABEL.
3. Press ENTER to display the VIDEO LABEL menu.
4. Press y or z to highlight the video source you want to label and
then press ENTER.
5. Press y or z to select
the desired label for
that input source.
6. Finish labeling the other video sources as desired. To return to the
previous menu, press y or z to highlight CUSTOM MENU,
and then press ENTER.
7. To exit the menu, press EXIT.
SOURCE SELECT I ON
ANT 1
V I DEO 1
V I DEO 2
V I DEO 3
Color Stream HD1
Color Stream HD2
HDM I
ANT 2
TV / V I DEO : TO SELECT
Pressing TV/VIDEO on the TV changes
the current signal source
CUSTOM
0 0 h 0 0 m
ON T I MER
0 h 0 0 m
SLEEP T I MER
CC OFF
FAVOR I TE CH
CH LABEL I NG
V I DEO LABEL
BACKGROUND SHADED
: MOVE ENTER : START
V I DEO LABEL
– – –
V I DEO1
V I DEO2 VCR
DVD
V I DEO3
C o l o r S t r e a m HD1
DTV
C o l o r S t r e a m HD2 SAT
HDM I CBL
CUSTOM MENU
: S E L E C T ENTER : SET
Note:
• When ColorStream HD 1 or HD 2 is
selected, the VIDEO OUT jack does not
output a signal. To receive a VIDEO OUT
signal, use a standard video or S-video IN
connection instead of the ColorStream
connection.
• In POP double-window mode, the main
window will display 480i signals only. If you
select ColorStream HD1 or ColorStream
HD2 while the POP picture is active, the
message "Not Available" will display.
Note the following regarding the
HDMI source selection:
This TV is not intended for connection
to and should not be used with a PC
(personal computer). See "Connecting
a device to the HDMI input" on page
15 for details.
TV front panel
MENU VOLUME CHANNEL EXIT TV/VIDEO
TV/VIDEO
POWER
TV / VIDEO RECALL
INFO
TV/VIDEO
1 2 3
4 5 6
8 9
7
+10 CHRTN
0
100
ENT
FAV
MENU
MENU
yzx •
DVDMENU
EXIT
FAV
ENTER
TV
CBL/SAT CH VOL
VCR
DVD
TouchFocus
49