Adjusting The Sound; Muting The Sound; Selecting Stereo/Sap Broadcasts - Toshiba 46H84C Owner's Manual

Adjusting the sound

Muting the sound

Press MUTE to temporarily reduce (1/2 MUTE) or turn off (MUTE)
the sound. While the sound is off, the screen will display "1/2
MUTE" or "MUTE" in the lower right corner. Every time you press
the button, the mute mode will change in the following order.
→ Normal → 1/2 MUTE → MUTE
When you select "MUTE" mode, the closed caption feature is
automatically activated. To deactivate this feature, deactivate MUTE.
This feature works only when the closed caption mode is set to OFF.
See "Using the closed caption feature" on page 50 for more
information.

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows you to listen to
high-fidelity stereo sound while watching TV. MTS can also transmit
a second audio program (SAP) containing a second language, music,
or other audio information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the word STEREO
or SAP appears on-screen every time the TV is turned on, the channel
is changed, or the RECALL button is pressed.
The MTS feature is not available when the TV is in VIDEO mode.
To listen to stereo sound:
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight MTS, and then press ENTER.
3. Press y or z to highlight STEREO, and then press ENTER.
A U D I O
MTS S T E R E O
AUDIO SETTINGS S A P
M O N O
WOW
SRS 3D
FOCUS
T r u B a s s
: SELECT E N T E R : SET
You can leave your TV in STEREO mode because it will
automatically output the type of sound being broadcast (stereo or
monaural). The word "STEREO" or "SAP" displays in yellow in
the menu when the TV receives the signal.
If the stereo sound is noisy, select MONO to reduce the noise.
To listen to SAP (if available):
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight MTS, and then press ENTER.
3. Press y or z to highlight SAP, and then press ENTER. You will
hear the station's second audio program (if available) from the
speakers, while viewing the original program's picture (see note at
right).
POWER
TV / VIDEO RECALL
INFO
RECALL
1 2 3
4 5 6
8 9
7
CHRTN
+10
0
100
ENT
FAV
MENU
MENU
DVDMENU yzx •
FAV
ENTER
TV
CBL/SAT CH VOL
VCR
DVD
POP DIRECT CH MUTE SLEEP
MUTE
TV/VCR PAUSE STOP PLAY
FREEZE SOURCE SPLIT
REW FF SKIP / SEARCH
CH SCAN SWAP POP CH
REC
LIGHT
TV front panel
MENU VOLUME CHANNEL EXIT TV/VIDEO
x •zy
MENU
Note :
A second audio program (SAP) can be heard
only on those TV stations that offer it.
For example, a station might broadcast music
as a second audio program. If you have SAP
on, you will see the current program on the
screen but hear music instead of the
program's normal audio.
However, if you have SAP on, and the station
you are watching is not currently
broadcasting a second audio program, the
station's normal audio will be output;
however, occasionally there is no sound at all
in SAP mode. If this happens, set the MTS
feature to STEREO mode.
TouchFocus
53