Using The Volume Lock Feature (8000); Operational Feature Reset (8900); Black - Toshiba 42HPX95 Owner's Manual

Programming the remote control to operate your other devices

Using the volume lock feature (8000)

For the TV, CABLE/SAT, VCR, and DVD modes, the volume
controls (VOL yz and MUTE) can be locked to the selected
device mode. This feature does not apply to the AUDIO 1 and
AUDIO 2 modes.
To lock the volume controls to always control the
CABLE/SAT device volume (for example):
1. Repeatedly press MODE to select CABLE/SAT mode.
2. While holding down the RECALL button, press 8 – 0 – 0 – 0.
3. Press VOL y.
The CABLE/SAT mode light will blink two times (locked).
To reset the volume controls to the original device mode:
1. While holding down RECALL, press 8 – 0 – 0 – 0.
2. Press VOL z.
The mode light will blink four times (unlocked).
#01E_031-039_4250HPX95 37

Black

(E) 42/50HPX95 *web 213:276
Chapter 3: Using the remote control

Operational feature reset (8900)

This feature clears all programmed remote control features not
related to "Device code setup" and resets the Volume Lock to
"TV."
To reset the features:
While holding down the RECALL button, press 8 –9 –0 –
0. The Mode indicator will blink two times, and then pause
and blink two more times.
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(continued)
Numbers
MODE
VOL yz
RECALL
05.9.12, 11:47 PM
37