Chapter 13: Appendix; Specifications - Toshiba 42HPX95 Owner's Manual

Integrated high definition plasma television
Hide thumbs Also See for 42HPX95:
Table of Contents

Advertisement

13
Appendix

Specifications

NOTE: • This model complies with the specifications listed below.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.
Television System
NTSC standard
ATSC standard (8VSB)
Digital Cable (64 QAM, 256 QAM; in-the-clear, unencrypted*)
*Encrypted channels can be viewed on this TV
using a CableCARD. ™ See page 14 for details.
Channel Coverage
VHF: 2 through 13
UHF: 14 through 69
Cable TV: Mid band (A-8 through A-1, A through I)
Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 135)
Power Source
120 V AC, 60 Hz
Power Consumption
42HPX95: 337 W (average)
57 W in standby mode (Using a CableCARD
53 W in standby mode (Without a CableCARD
50HPX95: 407 W (average)
57 W in standby mode (Using a CableCARD
53 W in standby mode (Without a CableCARD
Audio Power
10 W + 10 W
Speaker Type
Main: Four 2-3/8 4-3/4 inches (60 120 mm)
Tweeter: Two 1-1/4 inches (32 mm) round
Video/Audio Terminals
S-VIDEO INPUT:
Y : 1 V(p-p), 75 ohm, negative sync.
C : 0.286 V(p-p) (burst signal), 75 ohm
VIDEO/AUDIO INPUT:
VIDEO: 1 V(p-p), 75 ohm, negative sync.
AUDIO: 150 mV(rms) (30% modulation equivalent,
22 k ohm or greater)
®
ColorStream
(component video) HD INPUT:
Y : 1V(p-p), 75 ohm
P
: 0.7 V(p-p), 75 ohm
R
P
: 0.7 V(p-p), 75 ohm
B
AUDIO: 150 mV(rms), 22 k ohm or greater
Suggested formats: 1080i, 480p, 480i, 720p
HDMI
INPUT:
HDMI compliant (type A connector)
HDCP compliant
E-EDID** compliant
Suggested formats: 1080i, 480p, 480i, 720p
HDMI Audio: 2-channel PCM; 32/44.1/48 kHz sampling
frequency; 16/20/24 bits per sample
_________
** E-EDID = Enhanced-Extended Display Identification
#01E_129-135_4250HPX95
129
Black
(E) 42/50HPX95 *web 213:276
Video/Audio Terminals (continued)
PC INPUT:
15-pin D-sub Analog RGB
PC AUDIO INPUT:
3.5 mm stereo mini jack
VIDEO/AUDIO OUTPUT (also for recording):
VIDEO: 1 V(p-p), 75 ohm, negative sync.
AUDIO: 150 mV(rms) (30% modulation equivalent,
VARIABLE AUDIO OUTPUT:
0–300 mV(rms) (30% modulation equivalent,
2.2 k ohm or less)
G-LINK
3 V(p-p), 3.5 mm mono socket (IR blaster cables supplied)
)
IEEE1394 INPUT/OUTPUT:
)
IEEE1394 compliant 4-pin
DIGITAL AUDIO OUTPUT:
)
Optical type
)
Headphone jack:
3.5 mm stereo
Ethernet:
RJ-45
Dimensions
42HPX95: Width: 43-3/8 inches (1,100 mm)
50HPX95: Width: 49-5/8 inches (1,258 mm)
Weight
42HPX95: 116.8 lbs (53.0 kg)
50HPX95: 143.5 lbs (65.1 kg)
Supplied Accessories
• Two dual-wand IR blaster cables
• Remote control with two size "AA" alkaline batteries
• Power cord (three wire grounding type)
• Noise filter:
ZCAT 2436-1330A-M (see page 15)
ZCAT 3035-1330 (see page 15)
• Clip (see item 19 on page 3)
• Owner's Manual (This book)
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
2.2 k ohm or less)
:
Height: 30-3/4 inches (778 mm)
Depth: 15-3/8 inches (390 mm)
Height: 34-5/8 inches (877 mm)
Depth: 15-3/8 inches (390 mm)
05.9.12, 10:23 PM
129

Advertisement

Table of Contents
loading

This manual is also suitable for:

50hpx95

Table of Contents