Viewing The System Status; Restore Factory Defaults - Toshiba 42HPX95 Owner's Manual

Viewing the system status

To check the system status:
1. Press MENU and open the Setup menu.
2. Highlight Installation and press ENTER. (A new set of
Installation menu icons will appear on-screen, as shown
below right).
Setup
Installation
Sleep Timer
On/Off Timer
PC Settings
HDMI 1 Audio Auto
HDMI 2 Audio Auto
Slide Show Interval 2 Sec
Navigate Select CH RTN Back EXIT
3. Open the System Status menu, highlight System
Information, and then press ENTER.
4. Use the x • buttons to scroll through the menu bar to
check the Product Information and Software Version.
System Information
Product Information
Brand: Toshiba
Model: 42HPX95
IEEE1394 GUID: 00003914-28343803
Done
To close the screen and return to the Installation menu:
Highlight Done and press ENTER.
To return to normal viewing:
Press EXIT.

Restore Factory Defaults

To restore all settings and channels to their factory default
values:
1. Follow steps 1–3 above.
2. Use the x • buttons to scroll through the menu bar to
select Factory Defaults.
3. Enter your PIN code (or 0000 if no PIN code has been set).
4. Highlight Yes and press ENTER. The TV will turn off
automatically after a few seconds. After the TV turns off,
unplug the TV power cord and then plug it in again to
complete the restore process.
System Information
Press YES to confirm. After the TV
turns off, unplug it and plug it dack
in to complete the reset.
Yes No
To cancel the reset:
Highlight No and press ENTER.
#01E_049-057_4250HPX95 57
Black
(E) 42/50HPX95 *web 213:276
Chapter 6: Setting up your TV
System Status
System Infomation
Exit Navigate Select CH RTN Back EXIT Exit
System Information
Software Version
0.8.2
Jun 13 2005 - 13:54:14
FW:1.41
Sub:41
Done
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
05.9.12, 10:19 PM
57