Serial Port; Backup Battery - EdilKamin MYA ECO Installation, Use And Maintenance Manual

• ELECTRONIC EQUIPMENT
LEONARDO is a combustion safety and control system which allows optimal performance in all
®
conditions thanks to two sensors measuring the pressure level in the combustion chamber and smoke
temperature.
The detection of and subsequent optimisation of these two parameters is continuous in order to correct
operation anomalies in real time.
The LEONARDO system offers constant combustion, automatically regulating the draft based on the
®
characteristics of the chimney flue (bends, length, shape, diameter, etc..) and environmental conditions
(wind, humidity, atmospheric pressure, installations at high altitude, etc.).
The standards for installation must be respected.
LEONARDO system is also able to recognise the type of pellets and automatically djust the flow mo-
®
ment by moment to ensure the required level of combustion.
• ELECTRONIC CIRCUIT BOARD
ventilation
Legenda:
AUX = ON-OFF Remoto
RPM FUMI =Sensore giri Motore esp. fumi
IN T°J = Input Termocoppia "J"
TM 150°C = Termostato di sicurezza
SOS = Accensione e/o spegnimento di emergenza/cambio potenza

SERIAL PORT

The Dealer can install an optional on the AUX outlet for controlling the process of
switching on and off (e.g. telephone remote, local thermostat), located at the rear oh the
stove. Can be connected via special optional trestle (code 640560).

BACKUP BATTERY

A backup battery is found on the control board (3-Volt CR 2032 battery). Its malfun-
ction is indicated with the following messages (not considered a defect but due to
normal wear-and-tear): "Battery check".
For more detailed information, please contact the DEALER who has performed the first
1st ignition.
CHARACTERISTICS
M
N
smoke rpm
F
R
backup
battery
lithium
CR2032
D A
Smoke expulsion motor
F
M SCREW
G
L
H
flow sensor
sensor air
Vacuum gauge
ambient (optional)
P
B
C
ingnition element
230 vac power supply
reading points
combustion chamber
FUSE *
two fuses are inserted in the socket with
switch, located on the back of the stove,
one of which operational * and the other
is held in reserve **.
- 5
-
Reading
points
* **