Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for EdilKamin MYA ECO
Summary of Contents for EdilKamin MYA ECO
- Page 1 MYA ECO Installation, use and maintenance...
- Page 2 - All images are for illustration purposes only; actual products may vary. The undersigned EDILKAMIN S.p.a. with head offi ce headquarters at Via Vincenzo Monti 47 - 20123 Milan - Italy - VAT T00192220192 Declares under its own responsability as follows:...
-
Page 3: Principle Of Operation
• The hearth and hopper parts must only be cleaned when COLD. • The glass can be cleaned when COLD with a suitable product (e.g. GlassKamin Edilkamin) and a cloth. • Do not clean when hot. • Make sure the stove is installed and ignited the first time... - Page 4 DIMENSIONS AND FINISHINGS THE STOVE COMES IN FOUR STYLES: - Sides in white glass, top is cast iron and white glass - Sides in black glass, top in cast iron and black glass - Sides in grey glass, top in cast iron and grey glass - Sides in grey steel, top in cast iron and grey glass FRONT BACK...
-
Page 5: Serial Port
CHARACTERISTICS • ELECTRONIC EQUIPMENT LEONARDO is a combustion safety and control system which allows optimal performance in all ® conditions thanks to two sensors measuring the pressure level in the combustion chamber and smoke temperature. The detection of and subsequent optimisation of these two parameters is continuous in order to correct operation anomalies in real time. -
Page 6: Electrical Characteristics
1) keep in mind that external devices can cause interference to the operation of the circuit board. 2) caution: live parts. Servicing and/or inspections must be carried out by qualified staff. The data shown above is purely indicative. EDILKAMIN s.p.a. reserves the right to change the products at its discretion without notice. SAFETY DEVICES • THERMOCOUPLE: Placed at the smoke outlet to detect the temperature. -
Page 7: Installation
Do not use water to extinguish the fire; the stove’s power. An inadequate earthing system can cause Empty the pellet hopper; Contact specialist personnel before anomalies for which Edilkamin cannot be held liable. reigniting the stove. The stove is designed to work under any weather conditions. - Page 8 INSTALLATION 1) VERSION WITH GLASS SIDES AND TOP fig. 1 fig. 2 The stove is delivered with the sides and top removed and protected for the transportation phase. To remove the protection, proceed as follows: - Remove the glass top (A - fig. 1) by cutting the fastener (B - fig.
- Page 9 3) FLUE OUTLET AT THE TOP fig. 1 fig. 2 MYA ECO is set up to allow the flue pipe to be connected at the top or the back. The stove is delivered ready for the flue pipe to be fitted at the back.
- Page 10 INSTALLATION Fitting the top flue pipe outlet kit (FOR ALL VERSIONS) During the installation use the silicon paste to seal between the flue-gas extractor and the different connections of the flue outlet. - Remove the diaphragm (H - fig. 7) and, if necessary the per- fig.
- Page 11 INSTALLATION FLUE PIPE COVER KIT FOR VERTICAL fig. 1 fig. 2 FLUE PIPES - OPTIONAL EXTRA (CODE The kit includes the following parts: - N° 1 flue pipe fixing bracket (A) - N° 2 short pipe cover elements L = 25 cm (B-B1) - N°...
-
Page 12: Filling The Pellet Hopper
2 NOTE regarding the fuel. MYA ECO is designed and programmed to burn wood pellets If pellets with different characteristics are used, the stoves with 6 mm diameter. must be recalibrated a similar procedure to that carried out by Pellets are a type of fuel in the form of little cylinders, made the DEALER when the stove is ignited the first time. -
Page 13: Remote Control
INSTRUCTIONS FOR USE REMOTE CONTROL This controls all the functions. Key to buttons and display: : to turn off and on (to go from remote control on stand-by to remote control on) +/- : to increase/decrease the various regulations : to select Automatic function : to select Manual function and access the control and programming menus - icon flashing: remote control searching for network - icon fixed: remote control with connection enabled... - Page 14 INSTRUCTIONS FOR USE Filling the cochlea. The first time you use the product, or should the tank be completely emptied of pellets, to fill the coclea press both keys “+” and “–” on the remote control at the same time, holding for a few seconds. As you release the keys, the display should show the wording “LOAD”.
- Page 15 (by the Dealer). This provides a reference indicator. Greater precision is obtained by regularly zeroing the system before filling it again. Edilkamin does not accept any responsibility for differences from what is indicated (which may be due to external factors).
- Page 16 INSTRUCTIONS FOR USE Pellet reserve system Before enabling the system, you need to load a sack of pellets into the tank and use the stove until the loaded fuel has run out. This allows for a short system road test. After this, the tank can be filled completely and the stove started up.
-
Page 17: Daily Maintenance
(3 - fig. C) by removing the 3 screws located under this baffle (4 - fig. C). The ceiling is a component subject to wear, Edilkamin does not accept responsibility for it, more so if any breaks are due to ex- tracting or putting it back in its seating. -
Page 18: Seasonal Maintenance
MAINTENANCE SEASONAL MAINTENANCE (implemented by the DEALER) Consists in: • Clean the stove internally and externally • Thorough cleaning of the heat exchange piping inside the hot air outlet grille located in the upper part of the front of the stove •... -
Page 19: Possible Troubleshooting
POSSIBLE TROUBLESHOOTING In the event of problems the stove stops automatically and runs the shutdown process and the display shows text regarding the motivation of the shutdown (see the various alarms below). Never pull the plug during shutdown on account of malfunction. Should it block, to restart the stove you will need to allow the turn-off procedure to take place (600 seconds with audible signal), and then press the button Do not turn the stove on again before checking the cause of the malfunction and CLEANING/ EMPTYING the crucible. - Page 20 POSSIBLE TROUBLESHOOTING 7) Signalling: smoke °C/high. Problem: turns off due to exceeding maximum smoke temperature. Actions: • Check the pellet type • Check for anomalies with the smoke extraction motor • Check to see if there are any obstructions in the smoke channel •...
-
Page 21: Cleaning Accessories
CHECK LIST To be integrated with a complete reading of the technical specifications Positioning and installing • First ignition performed by authorised CAT who released the guarantee certificate • Room ventilation • Only the stove outlet passes through the smoke channel/chimney flue •... - Page 24 w w w . e d i l k a m i n . c o m cod. 941252-GB 07.16/C - 24...