Advertisement
Step9.
Fit the Bluetooth module into the following position.
Pass the FPC cable as shown below so that they do not get caught on the gears or by the cover.
B-EP4DL
Bluetooth Module
Step10. Close the front cover.
NOTES: 1. Make sure that the pins on the both sides of the front cover are fit in position, as shown in the pictures
below.
2. Do not install the front cover with the top cover open button depressed. Doing so could disable the top
cover open button after the assembly, and as a result, the top cover cannot be opened.
FPC Cable
Good
Top Cover Open Button
B-EP2DL
Bluetooth Module
Pin
No Good
4/8
FPC Cable
Front Cover
Advertisement
