Toshiba B-EP700-BLTH-QM-R Installation Manual page 5

Step11. Mount the left side cover to the printer while fitting the tabs on the left side cover into the slots of the
printer enclosure. Place the cables avoiding the protrusions on the left side cover. Especially, be
careful of the protrusion E on the cover for the B-EP2DL series.
B-EP4DL Series: Fit the tabs A to D into the slots A' to D'.
Tab B
Tab A
Protrusion
B-EP2DL Series: Fit the tabs A to C into the slots A' to C'.
Tab B
Tab A
E
Protrusion
NOTE: It is easy to mount the left side cover if you fit the tabs from the LCD side in order, then secure the
bottom side. Be careful not to catch the cable by the cover while reassembling .
Left Side Cover
Tab C
Tab D
Tab C
D'
C'
5/8
C'
B'
A'
B'
A'