Connecting An Audio System; Connecting An A/V Receiver - Toshiba 32HFX72 Owner's Manual

Connecting an audio system

This connection allows you to use an audio amplifier to adjust the
audio level. This also allows you to use external speakers.
To control the audio, turn on the TV and the stereo amplifier, and
turn off the built-in speakers (see "Turning off the built-in speakers"
on page 50).
You will need:
• one pair of audio cables
Note:
To hear sound when using an external audio amplifier, the
volume of both the TV and the amplifier must be set
above 0 (zero).
For example, if the volume of the TV is set to 0, you will
not be able to hear any sound, even the volume of the
amplifier is at its highest level.

Connecting an A/V receiver

This connection allows you to use an audio/video (A/V) receiver to
enhance your TV's sound.
If you have a system with Dolby Pro Logic
add to the realism of the sound by using the TV's internal speakers as
center channel speakers.
You will need:
• one coaxial cable
• one set of standard A/V cables
• one single audio cable for the audio center channel
From Antenna
TV
I N
I N
S-VIDEO
COLOR COLOR
VIDEO STREAM STREAM
HD - 1 Y HD - 2
L/MONO
P
B
L L
AUDIO
AUDIO AUDIO
R P
R
VIDEO-1 VIDEO-2 R R
From
To TV IN
video OUT
To A/V Receiver
Note:
Refer to the instructions provided with your A/V receiver
for details about your surround sound system.
When the Audio Center Channel ON/OFF switch is in
the ON position, the TV speakers will function only as
center channel speakers.
Adjust the volume for the center channel speakers
using the center level control on the A/V receiver.
To use the TV speakers as normal speakers, set the
Audio Center Channel ON/OFF switch to the OFF
position.
®
surround sound, you can
ANT(75 )
ON OFF
ANT-1 OUT ANT-2
OUT
VIDEO
Y
VAR
AUDIO
L/
P MONO
B
AUDIO CENTER
CHANNEL IN
L
AUDIO
P
R
ON OFF
R R
From
Center OUT
TV
ANT(75 )
ANT-1 OUT
I N
I N OUT
S-VIDEO
COLOR COLOR
VIDEO STREAM STREAM VIDEO
Y Y
HD - 1 HD - 2
VAR
AUDIO
L/
L/MONO P P
B B MONO
L L
AUDIO
L
AUDIO AUDIO AUDIO
R P P
R R
R R
VIDEO-1 VIDEO-2
R R
L R
LINE IN
Amplifier
Caution:
To avoid damaging the speakers:
• Turn off the TV before connecting or
disconnecting the Audio Center Channel
audio cable.
• Do not connect from the A/V receiver's
Center Speaker OUT (amplified signal) to
the TV's Audio Center Channel IN.
Dolby Pro Logic* surround sound
system connection example
Audio Video
VCR LDP/DVD
Video Audio
A/V receiver
T V
Left Right
speaker speaker
Surround Surround
speaker L speaker R
_________
* Dolby Pro Logic is a registered trademark
of Dolby Laboratories Licensing
Corporation.
ANT-2
AUDIO CENTER
CHANNEL IN
ON OFF
13