Page 2
Corporation recognizes environmental protection as a key management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental activities. In line with this, Toshiba proactively promotes Green Procurement, and seeks to purchase and use products, parts and materials that have low environmental impacts.
Page 3
Page 1 of 1 LEAD-FREE SOLDER This product is manufactured using lead-free solder as a part of a movement within the consumer products industry at large to be environmentally responsible. Lead-free solder must be used in the servicing and repair of this product. WARNING: This product is manufactured using lead free solder.
Page 4
Through WEB, ver. 6.5 has been released but with it, the linking function in this manual may not work properly. If ver. 6.5 has been installed, uninstall it and reinstall ver. 6.0. To get ver. 6.0, click the icon, or contact to the nearest Toshiba Service Centre for further assistance. Freezing windows opened (Cannot close the open windows) This may happen occasionally.
Page 5
Page 2 of 2 Continue to use by operating the windows. Precaution when opening the diagrams While opening the diagrams, the menu in the left frame changes its color to GRAY. This is an indication that the viewer is processing. With this condition, the menu indication color may stick to the GRAY color or Windows may freeze if clicking other menu.
Page 6
Page 1 of 4 IMPORTANT NOTICE User Guide Autodesk® DWF™ Viewer is necessary to view drawings and to activate the functions of this system. Please download and install. When Windows XP SP2 is used, pop-up windows are limited by the enhanced security function and this sample may not work.
Page 7
Page 2 of 4 Operating Environment : Pentium III or higher recommended Monitor : 1024 x 768 or higher resolution recommended file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.893\TOSHI... 14.02.2017...
Page 8
Page 3 of 4 Mouse : A mouse with wheel recommended : Microsoft Windows 2000/XP Browser Microsoft Internet Explorer 6.0 or later Drawing viewer : Autodesk DWF Viewer 6.0 * Use the software following respective license terms and conditions. Note: In case of using this service manual with network connection, allocate its folder to the client PCs as network drive to avoid any possible malfunction.
Page 9
Page 4 of 4 Layer Display Changing Function When any of the color buttons on the toolbar is clicked, it can be selected to display desired layer in its color or not to display each layer. This allows you to see the pattern layer only by setting other layers to "non-display".
Page 10
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Toshiba shall not be liable for any damages, losses, expenses or costs, if any, incurred in connection with or as a result of use of any information or data provided herein.
Page 11
ADJUSTMENT Service Mode Entering to Service Mode 1. Press MUTE button once on remote control.
Page 12
Page 1 of 2 FUNCTION AND OPERATION TV Front and Side Panel Control and Connection file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.281\TOSHI... 14.02.2017...
Page 13
Page 2 of 2 file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.281\TOSHI... 14.02.2017...
Page 14
Page 1 of 3 FUNCTION AND OPERATION Learning about the Remote Control file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.675\TOSHI... 14.02.2017...
Page 15
Page 2 of 3 file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.675\TOSHI... 14.02.2017...
Page 16
Page 3 of 3 file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.675\TOSHI... 14.02.2017...
Page 17
Page 1 of 4 FUNCTION AND OPERATION Programming Channel into the TV's Channel Memory Programming Channel Automatically file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.147\TOSHI... 14.02.2017...
Page 18
Page 2 of 4 file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.147\TOSHI... 14.02.2017...
Page 19
Page 3 of 4 Manually Adding and Deleting Channel in the Channel Memory file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.147\TOSHI... 14.02.2017...
Page 20
Page 4 of 4 file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.147\TOSHI... 14.02.2017...
Page 21
Page 1 of 2 FUNCTION AND OPERATION Programming Your Favorite Channel file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.709\TOSHI... 14.02.2017...
Page 22
Page 2 of 2 file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.709\TOSHI... 14.02.2017...
Page 23
Page 1 of 2 FUNCTION AND OPERATION Labeling Channel file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.313\TOSHI... 14.02.2017...
Page 24
Page 2 of 2 file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.313\TOSHI... 14.02.2017...
Page 25
Handling the LCD Module Page 1 of 4 SAFETY INSTRUCTION Handling the LCD Module Safety Precaution In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in or drink this fluid. Also, never touch this fluid. Such actions could cause toxicity or skin irritation. If this fluid should enter the mouth, rinse the mouth thoroughly with water.
Page 26
Handling the LCD Module Page 2 of 4 3. If the panel surface becomes soiled, wipe with cotton or a soft cloth. If this does not remove the soiling, breathe on the surface and then wipe again. If the panel surface is extremely solied, use a CRT cleaner as a cleaner. Wipe off the panel surface by drop the cleaner on the cloth.
Page 27
Handling the LCD Module Page 3 of 4 6. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static electricity. When handling the module, use a wrist ground or anchor ground. 7. Do not expose the LCD module to direct sunlight or strong ultraviolet rays for an extended period of time.
Page 28
Handling the LCD Module Page 4 of 4 10. When transporting the LCD module, do not use packing containing epoxy resin (amine) or silicon resin (alcohol or oxim). The gas generated by these materials can cause loss of polarity. file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.590\TOSHI... 14.02.2017...
Page 29
SAFETY INSTRUCTION [LCD] USA Page 1 of 3 SAFETY INSTRUCTION WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" INSTRUCTIONS BELOW. Safety Precaution WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER. THE FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED BEFORE SERVICING THIS CHASSIS.
Page 30
SAFETY INSTRUCTION [LCD] USA Page 2 of 3 inflammability, voltage resistance, etc. therefore, use only replacement parts that have these same characteristics. Use only the specified parts when the mark is indicated in the circuit diagram or parts list. 7. Parts mounting and routing dressing of wirings should be the same as that used originally.
Page 31
SAFETY INSTRUCTION [LCD] USA Page 3 of 3 limit constitutes a potential shock hazard and must be corrected immediately. Product Safety Notice Many electrical and mechanical parts in this chassis have special safety-related characteristics. These characteristics are often passed unnoticed by a visual inspection and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.
Page 32
Page 1 of 2 SPECIFICATION file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.722\TOSHI... 14.02.2017...
Page 33
Page 2 of 2 file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.722\TOSHI... 14.02.2017...
Page 46
SIGNAL BOARD AV BOARD PANEL DDR RAM FLI8538 CORTEZ Plus VBI Data Processor PANEL I/F DCDi Input Video Analog MADi Decoder Terminal Front Scaling (Audio) (16port) LVDS CVBS(L/R) S-VIDEO(L/R) YCbCr(L/R) Channel Standby Process uCON Digital Input A EEPROM PC_IN(L/R) Digital Input B Micro- processor...
Page 47
Page 1 of 2 SCHEMATIC DIAGRAM Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit...
Page 48
Page 2 of 2 All capacitors are ceramic 50 V, unless otherwise noted as the following marks. = Electrolytic capacitor = Mylar capacitor 3. The parts indicated with " " have special characteristics, and should be replaced with identical parts only. 4.
Page 102
Accessory Page 1 of 1 Accessory Location Parts No. Description Y101 75002553 MANUAL ENG/FRE, OM Y109 23945015 BAG, POLYETHYLENE COVER 250X400 Y130 75002548 REMOCON HAND UNIT, CT-90262 Y170 23845800 HOLDER, WIRE, NYLON66 D6.8 file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.820\TOSHI... 14.02.2017...
Page 103
Cabinet Page 1 of 1 Cabinet Location Parts No. Description A201 75002551 CESE/COVER/LID FRONT BEZEL ASSY A320 75002550 PIECE FRONT AV ASSY A340 75001920 PIECE BUTTON 7 KEY A380 23717240 SCREW, BITTB3X10SZN A401 75002549 CESE/COVER/LID BACK COVER ASSY A410 23717219 SCREW, PP3X8+SW+W SBN A411 23717267...
Page 105
Packing Page 1 of 1 Packing Location Parts No. Description A701 75002552 CARTON CASE A702A 75002344 PAD TOP PACKING A702B 75002345 PAD BOTTOM PACKING A703 23945143 BAG, PROTECTIVE A709 75002346 PAD CENTER PACKING file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.021\TOSHI... 14.02.2017...
Page 106
Page 1 of 2 PARTS LIST Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit...
Page 107
Page 2 of 2 : Electrolytic : Metal Film : Fusible Resistor All CD and PF capacitors are ±5 %, 50 V and all resistor, ±5 %, 1/6 W unless otherwise noted. file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.986\TOSHI... 14.02.2017...
Page 108
U01A POWER (PE0103) Page 1 of 4 U01A POWER (PE0103) Location Parts No. Description U01A 75002554 PWU, POWER, B910PE0103A1 C801 76503507 PLASTIC FILM, AC275V 0.22UF K C802 76503507 PLASTIC FILM, AC275V 0.22UF K C803 76168103 PLASTIC FILM 92T 400V 220NF J C804 76214103 CERAMIC DISC, 500V B 0.01UF K...
Page 115
U02A AV TERM (PE0102) Page 1 of 11 U02A AV TERM (PE0102) Location Parts No. Description U02A 75002543 PWU, AV TERM, B910PE0102A1 C102 76073019 ELECTROLYTIC, 10V 470UF M C103 76109102 CERAMIC CHIP, 50V B 1000PF K C104 76766479 ELECTROLYTIC, 50V 4.7UF M C105 76073019 ELECTROLYTIC, 10V 470UF M...
Page 116
U02A AV TERM (PE0102) Page 2 of 11 C630 76092730 CERAMIC CHIP, 16V B 0.1UF K C635 76666221 ELECTROLYTIC, 16V 220UF M C636 76666221 ELECTROLYTIC, 16V 220UF M C640 76092738 CERAMIC CHIP, 25V B 0.47UF K C641 76092738 CERAMIC CHIP, 25V B 0.47UF K C642 76285104 CERAMIC CHIP, 50V B 0.1UF K...
Page 117
U02A AV TERM (PE0102) Page 3 of 11 CG13 76669100 ELECTROLYTIC, 50V 10UF M CG14 76669100 ELECTROLYTIC, 50V 10UF M CG15 76105101 CERAMIC CHIP, 50V CH 100PF J CG16 76105101 CERAMIC CHIP, 50V CH 100PF J CG17 76669470 ELECTROLYTIC, 50V 47UF M CG20 76669100 ELECTROLYTIC, 50V 10UF M...
Page 118
U02A AV TERM (PE0102) Page 4 of 11 CV212 76793471 ELECTROLYTIC, 10V 470UF M CV213 76100104 CERAMIC CHIP, 25V F 0.1UF Z D401 23357703 DIODE, 1SS355 D621 23362140 DIODE, KDS160-RTK D622 23362214 DIODE, SCHOTTKY, RSX301L-30 TE25 D623 23362214 DIODE, SCHOTTKY, RSX301L-30 TE25 D624 23362140 DIODE, KDS160-RTK...
Page 126
U02B FRONT AV-1 (PE0102) Page 1 of 1 U02B FRONT AV-1 (PE0102) Location Parts No. Description U02B 75002544 PWU, FRONT AV-1, B910PE0102A2 CC11 76109102 CERAMIC CHIP, 50V B 1000PF K CC12 76109102 CERAMIC CHIP, 50V B 1000PF K CV12 76109103 CERAMIC CHIP, 50V B 0.01UF K CV13 76105101...
Page 127
U02C LED (PE0102) Page 1 of 1 U02C LED (PE0102) Location Parts No. Description U02C 75002545 PWU, LED, B910PE0102A3 CB02 76202221 ELECTROLYTIC, 10V 220UF M CB03 76100104 CERAMIC CHIP, 25V F 0.1UF Z CB04 76100104 CERAMIC CHIP, 25V F 0.1UF Z CB05 76202221 ELECTROLYTIC, 10V 220UF M...