Saving new preference
You can save the PICTURE qualities (contrast, brightness, color, tint,
and sharpness) you adjusted in the picture preference mode.
To save your new preferences:
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press y or z to highlight SAVE NEW PREFERENCE.
3. Press x or •. When complete, the menu displays "DONE."
P CTURE ANTENNA
I
MODE
PREFERENCE
FLESH
TONE
OFF
CableClear DNR
OFF
SVM
H I GH
COLOR
TEMPERATURE
MEDI UM
PREFERENCE
SAVE NEW
The mode automatically change to PREFERENCE (see "Selecting the
picture mode" on page 41).
You can choose your saved preferences any time by selecting
PREFERENCE in the PICUTRE menu (see "Selecting the picture
mode" on page 41).
Using the flesh tone feature
This feature displays natural flesh tones by correcting the tint.
To turn on the flesh tone feature:
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press y or z to highlight FLESH TONE.
3. Press x or • to highlight ON.
P CTURE ANTENNA
I
MODE
PREFERENCE
FLESH TONE
ON
/
OFF
CableClear DNR
OFF
SVM
H I GH
COLOR
MEDI UM
TEMPERATURE
SAVE NEW
PREFERENCE
Using the CableClear™ DNR (digital noise reduction)
feature
This feature allows you to reduce visible interference in your TV
picture. This is useful when receiving a broadcast with a weak signal
(especially Cable channel) or playing back a video cassette or disc
damaged by repeated use.
To turn on the CableClear
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press y or z to highlight
CableClear DNR.
3. Press x or • to highlight AUTO.
To turn off the CableClear DNR
feature:
Highlight OFF in step 3 above.
42
DONE
™
DNR feature:
P CTURE ANTENNA
I
MODE
PREFERENCE
FLESH TONE
ON
™
CableClear DNR
AUTO
SVM
H I GH
COLOR
TEMPERATURE
MEDI UM
SAVE NEW
PREFERENCE
Note:
The "CableClear DNR" display will change to
"DNR" in video mode.
/
OFF
MENU
yzx •