sparkfun Artemis Integration Manual page 17

FCC Modular Usage Statement
Note 1:​ This module certified complies with RF exposure requirements under mobile or fixed condition; this
module is to be installed only in mobile or fixed applications.
A mobile device is defined as a transmitting device designed to be used in other than fixed locations and to
generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained
between the transmitter's radiating structure(s) and the body of the user or nearby persons. Transmitting
devices designed to be used by consumers or workers that can be easily re-located, such as wireless devices
associated with a personal computer, are considered to be mobile devices if they meet the 20 centimeter
separation requirement.
A fixed device is defined as a device is physically secured at one location and is not able to be easily moved to
another location.
Note 2:​ Host product manufacturers must provide in their user manual the required RF exposure information
for mobile & fixed usage of this module. Host product manufacturers must use the following RF exposure
statement in their user manual "This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm
between the radiator and all persons. This transmitter must not be co-location or operating in conjunction with
any other antenna or transmitter."
Note 3: ​ A ny modifications made to the module will void the Grant of Certification, this module is limited to OEM
installation only and must not be sold to end-users, end-user shall have no manual instructions to remove or
install the device, only software or operating procedure shall be placed in the end-user operating manual of
final products.
Note 4: ​ A dditional testing and certification may be necessary when multiple modules are used.
Note 5: ​ T he module may be operated only with the integral chip antenna with which it is authorized.
Note 6: ​ T o ensure compliance with all non-transmitter functions the host manufacturer is responsible for
ensuring compliance with the module(s) installed and fully operational. For example, if a host was previously
authorized as an unintentional radiator under the Supplier's Declaration of Conformity procedure without a
transmitter certified module and a module is added, the host manufacturer is responsible for ensuring that the
after the module is installed and operational the host continues to be compliant with the part 15B unintentional
radiator requirements. Since this may depend on the details of how the module is integrated with the host, the
manufacturer shall provide guidance to the host manufacturer for compliance with the part 15B requirements.
Note 7:​ The FCC ID label on the final system must be labeled with "Contains FCC ID: 2ASW8- ART3MIS" or
"Contains transmitter module FCC ID: 2ASW8- ART3MIS".
Note 8: ​ T he FCC rule/s for this module are CFR 47 Part 15 Subpart C.
Note 9: ​ T his modular transmitter is only FCC authorized for the specific rule parts listed on its grant. The host
product manufacturer is responsible to any other FCC rules that apply to the host not covered by the modular
SparkFun Electronics Inc - Artemis Integration Guide - 1p0p3 17