Specifications; Compliance With Standards Type 5128 - BRUEL & KJAER HF HATS 5128 User Manual

6.1

Compliance with Standards Type 5128

The CE marking is the manufacturer's declaration that the product meets the requirements of the
applicable EU directives
,
RCM mark indicates compliance with applicable ACMA technical standards – that is, for
telecommunications, radio communications, EMC and EME
,
China RoHS mark indicates compliance with administrative measures on the control of pollution caused
by electronic information products according to the Ministry of Information Industries of the People's
Republic of China
WEEE mark indicates compliance with the EU WEEE Directive
EN/IEC 61010–1: Safety requirements for electrical equipment for measurement, control and
laboratory use.
Safety
ANSI/UL 61010–1: Safety requirements for electrical equipment for measurement, control and
laboratory use.
EN/IEC 61000–6–3: Generic emission standard for residential, commercial and light industrial
environments.
EMC Emission
CISPR 22: Radio disturbance characteristics of information technology equipment. Class B Limits.
FCC Rules, Part 15: Complies with the limits for a Class B digital device.
EN/IEC 61000–6–1: Generic standards – Immunity for residential, commercial and light industrial
environments.
EMC Immunity
EN/IEC 61326: Electrical equipment for measurement, control and laboratory use – EMC requirements.
Note: The above is only guaranteed using accessories listed in this manual.
IEC 60068–2–1 and IEC 60068–2–2: Environmental Testing. Cold and Dry Heat.
Operating Temperature: –5C to +40C (+23F to +104F)
Temperature
Storage Temperature: –25C to +70C (–13F to +158F)
IEC 60068–2–78: Damp Heat: 93% RH (non-condensing at 40 C (104 F))
Humidity
Non-operating:
IEC 60068–2–6: Vibration: 0.3 mm, 20 m/s
Mechanical
IEC 60068–2–29: Bump: 1000 bumps at 250 m/s
Chapter 6

Specifications

2
, 10–500 Hz
2
47