Sec; Configuring The Meter; Selecting The Input Type - Omega DP25B-E User Manual

4

Configuring The Meter

Refer to Table 6-1 for a summary list of menu configuration.
Note

4.1 SELECTING THE INPUT TYPE

To select your appropriate input type signal, follow these steps:
Before proceeding, set the input DIP switch settings at the back of your
Note
meter. (Refer to Table 2-3).
Press the MENU button. The meter shows INPT .
1.
Press the ∂TARE button. The meter flashes one of the following:
2.
•
•
•
•
•
Press the ßMAX button to scroll through available choices.
3.
4. Press the MENU button to store your choice. The meter momentarily shows
STRD , followed by DEC.P (Decimal Point).
22
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SECTION 4. CONFIGURING THE METER
0-20 (for 4-20 mA dc) (Default)
100M (for 0-100 mV dc)
±50M (for ±50 mV dc)
10V (for 0-10 Vdc)
±5V (for ±5 Vdc)
INPT