Instruction Manual - Power Craft 11940 Instruction Manual

INSTRUCTION MANUAL

Introduction
To get the most out of your new angle grinder,
please read through these instructions and the
attached safety regulations before use. Please also
save the instructions in case you need to remind
yourself of the grinder's functions at a later date.
You can read more about our products at
www.powercraft.com.
Technical specifications
Voltage/frequency:
Power rating:
Disc diameter:
Speed:
Weight:
Acoustic pressure:
Sound output:
Vibrations:
Major components
1. Handle
2. On/off button
3. Lock button
4. Carbon brushes
5. Side handle
6. Disc shield
ENGLISH
7. Grinding disc
8. Spindle lock
9. Ventilation slots
Special safety regulations
Check that the ventilation slots are not blocked.
Always secure the item to be worked with cramps
or the like. Never hold the item to be worked by
hand.
Always use the correct type of grinding disc for the
230V ~ 50Hz
type of work to be performed.
1,800 W
Never use discs with a maximum RPM less than
that of the tool.
230 mm
Never use oversized discs.
6,000 RPM
Never use damaged or worn discs, or discs that
6 kg
cannot be easily fitted to the grinder spindle.
89.7 dB(A)
Never use an adapter ring or the like to fit discs
102.7 dB(A)
with holes that are too large for the grinder
spindle.
1.9 m/s2
Never allow the disc to be in contact with the item
to be worked - or other objects - when starting the
grinder.
Never place your hand or fingers near the disc
while the grinder is running.
Keep the power cable well clear of the working
area.
Keep the handles and the grinder as a whole free of
oil, grease, water and other liquids.
Never depress the spindle lock while the disc is
rotating!
Never put the grinder down until the disc has
completely stopped rotating.
Do not touch the item to be worked or metal
filings until they have cooled.
Do not use the grinder to work items made of
magnesium.
11