Advertisement
Quick Links
Advertisement
Related Manuals for Microtest MICROSCANNER
Summary of Contents for Microtest MICROSCANNER
- Page 1 SCANNER SCANNER User Guide ENGLISH ENGLISH - 1...
- Page 2 ENGLISH - 2...
- Page 3 ENGLISH - 3...
- Page 4 ENGLISH - 4...
- Page 5 ENGLISH - 5...
- Page 6 ENGLISH - 6 MICROSCANNER will not function properly with a 9 Volt Carbon Battery.
- Page 7 (1-800-638-3497) (U.S. and Canada only) (.AX) (U.S. and Canada only) ENGLISH - 7...
- Page 8 ENGLISH - 8 MICROSCANNER Tests 1. Connect the cable to be tested to the jack (identified on the unit right above the modular 8 jack). 2. To display the Wiremap screen, press the key until the word appears on the screen.
- Page 9 If a cable is wired correctly, pin-to-pin, but there is a split pair, Wiremap will display . .or example a wire from the 1 - 2 pair could be twisted with a wire from the 3 - 6 pair. ENGLISH - 9...
- Page 10 ENGLISH - 10 1. Simply plug the two ends of a cable into the two modular 8 jacks ( ) on MICROSCANNER. 2. To display the Wiremap screen, press the key until the word appears on the screen.
- Page 11 1. Connect the cable to be tested to the jack (identified on the unit right above the modular 8 jack). 2. To display the length screen, press the key until the word appears on the screen. The overall cable length will be shown.
- Page 12 (identified on the unit right above the modular 8 jack). 2. To display the length screen, press the key until the word appears on the screen. MICROSCANNER displays the word followed by the length to the hub. 3. When MICROSCANNER displays...
- Page 13 (identified on the unit right above the modular 8 jack). 2. To display the length screen, press the key until the word appears on the screen. MICROSCANNER displays the word followed by the length to the ENGLISH - 13...
- Page 14 ENGLISH - 14 3. When MICROSCANNER displays the cable length, press the key to activate the blinking Hub light. 1. Press the key to display Pair 1 - 2 length. 2. Press the key again to display the other pair combinations.
- Page 15 (MICROSCANNER PRO) This feature is available in the residential version or when using the COAX upgrade kit. Ω 1. Attach the supplied COAX adapter to the jack (identified on the unit right above the modular 8 jack). 2. Connect the cable to be tested to the jack.
- Page 16 ENGLISH - 16 1. Connect the cable to be tested to the jack (identified on the unit right above the modular 8 jack). 2. To display the Office Identifier screen, press key until the word displayed on the screen. 3. Insert the Office Identifier plugs into wall outlets in the offices you wish to locate.
- Page 17 (MICROSCANNER PRO) 1. Attach the coax adapter to the jack (identified on the unit right above the modular 8 jack). 2. To display the Office Identifier screen, press key until the word displayed on the screen. 3. Insert the Office Identifier plugs into wall outlets in the offices you wish to locate.
- Page 18 ENGLISH - 18 1. To display the Toner screen, press the key until the words are displayed on the screen. 2. To select a different tone sequence press the key.
- Page 19 ENGLISH - 19...
- Page 20 ENGLISH - 20...
Need help?
Do you have a question about the MICROSCANNER and is the answer not in the manual?
Questions and answers