Setting The Date And Time - Toshiba D-VR3SB Owner's Manual

Setting the Date
and Time
Your DVD Recorder-VCR contains a 24-hour clock and
calendar used to:
• Automatically stop programme recording
• Preset your DVD Recorder-VCR to record a pro-
gramme automatically You must set the date and time
• You must set the date and time when you purchase the
DVD Recorder-VCR
• Do not forget to reset the time when you change clocks
from winter to summer time and vice versa.
With the unit in Stop mode, press the MENU
1
button.
Programme
❷
2 Using the buttons, move the selection bar
to "Setup" then press OK to select.
3 Select "Clock Set" using the
❿
press the or OK button.
Programme
28 - English
4
5
Programme
6
7
Note
❷
buttons, then
➛❿
Press to select the hour, minutes, day,
month and year.
• The option selected highlight.
Programme
/
❷
Press the button to increase or decrease the
value.
• The day of the week is displayed automatically.
❷
• You can hold the buttons down to scroll
more quickly through the values.
Press OK button, then the date and time will be
saved. If you don't press OK button, it will not be
saved.
On completion, press RETURN to exit the menu.
You must have the aerial connected to set the
Auto Clock. Connecting the RF Cable on
page 19.
Auto Clock : The DVD Recorder-VCR sets the
clock automatically by searching for a channel
that carries a time signal.