Toshiba D-R400 Owner's Manual page 94

HDMI (cont'd)
2
HDMI Audio (Default : ON)
If you do not want to output the audio through HDMI
(when you digitally output the audio through the
COAXIAL DIGITAL AUDIO OUTPUT jack to your audio
system, etc.), you can set the HDMI audio output off.
Use [K / L] to select a setting, then press [ENTER].
• Set to "OFF" when the HDMI sound is not outputted.
General Setting
Playback
Display
Video
HDMI Audio
Recording
ON
Clock
OFF
DivX
HDMI
Reset All
Your setting will be activated.
3
RGB Range (Default : Normal)
You can adjust the RGB range to make the dark areas of
the HDMI images brighter.
Use [K / L] to select a setting, then press [ENTER].
• Select "Enhanced" if the black-white contrast is not clear.
• This setting is effective only for HDMI RGB output.
General Setting
Playback
Display
Video
RGB Range
Recording
Normal
Clock
Enhanced
DivX
HDMI
Reset All
Your setting will be activated.
4
When you finish with the setting,
press [SETUP] to exit.
94 94 EN EN
E7E7AUD_EN.indb 94 E7E7AUD_EN.indb 94
GENERAL SETTING
Format
HDMI Audio
RGB Range
Format
HDMI Audio
RGB Range
2007/01/29 19:04:39 2007/01/29 19:04:39