Toshiba D-R400 Owner's Manual page 39

Checking, canceling, or correcting the timer
programming information
1) Press [I/y ON/STANDBY].
2) Press [TIMER PROG.].
3) Check the information on the list you want to edit.
Timer Programming
JAN/ 2/07 12:00 AM
SP (1:00)
Date
JAN/02
4-A) To delete the timer program:
1 Use [K / L] to select the program you want to
delete, then press [ENTER].
2 Use [K / L] to select "Delete", then press
[ENTER].
Selection menu will appear.
3 Use [K / L] to select "Yes", then press [ENTER].
4-B) To correct the timer program:
1 Use [K / L] to select the program you want to
correct, then press [ENTER].
2 Use [K / L] to select "Program Change", then
press [ENTER].
3 Correct the timer program by using
[K / L / { / B], then press [ENTER].
5) Press [TIMER PROG.] to exit.
6) Press [I/y ON/STANDBY] to return to the timer
standby mode.
To stop the timer recording in process
Press [STOP C] on the front panel of the unit.
[STOP C] on the remote control is not effective.
Note
• Press [TIMER PROG.] to check the timer recording in
progress.
When the timer recording is proceeding, that
program will be highlighted with red. In this case,
you cannot select any other program.
E7E7AUD_EN.indb 39 E7E7AUD_EN.indb 39
TIMER RECORDING
L1 SP
MON JAN/01 10:00AM
Start End L1/L2
12:00AM 1:00AM L1
New Program
1/1
If the timer program did not complete correctly,
the error number appears in the timer pro-
gramming list.
Timer Programming
Date Start
E40 JAN/02 12:00AM 1:00AM
New Program
Each error number means:
E1-22 Recording error other E40
E37-39 than below
E23-24 Unrecordable disc
E25-28 Copy prohibited program
E29 Disc protected E41
E30 Disc full E42
E31-32 Already 99 titles E43
recorded
E33 Already 999 chapters E44
recorded
E34 No space for Control E45
information
E35 PCA full *1 E46
E36 Already finalized
video format disc
• A program with the error number is grayed in the timer
programming list.
• Once the timer programming list with error line(s) is
displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be
cleared.
*1 PCA is a disc's space reserved for recording test.
MON JAN/01 10:00AM
End L1/L2
L1
1/1
Some portion has
not been recorded
because of program
overlapping.
Recording did not
start at the start time.
Power failed
No disc when recording
Already 49 titles
recorded
Already 254 chapters
recorded
Copy prohibited
program
It is impossible to
record additionally
on a disc recorded
by other units
when setting
"Make Recording
Compatible" to "OFF".
EN EN 39 39
2007/01/29 19:03:58 2007/01/29 19:03:58