Toshiba D-R400 Owner's Manual page 87

Playback (cont'd)
2
Audio Out
Choose the appropriate audio setting for your external device.
It will only affect a disc playback.
Use [K / L] to select a desired item, then press [ENTER].
General Setting
Playback
Display
Video
Audio Out
Recording
Dynamic Range Control
Clock
PCM
DivX
Dolby Digital
HDMI
DTS
Reset All
A
Dynamic Range Control (Default : ON)
Set to "ON" to compress the range between soft and loud sounds.
Use [K / L] to select a setting, then press [ENTER].
General Setting
Playback
Display
Video
Audio Out
Recording Dynamic Range Control
Dynamic Range Control
Clock
PCM ON
DivX
Dolby Digital OFF
HDMI
DTS
Reset All
Your setting will be activated.
Note
• Dynamic range control function is available only on
the discs which are recorded in the Dolby Digital
format.
B
Settings for PCM (Default : 48kHz)
Use [K / L] to select a setting, then press [ENTER].
General Setting
Playback
Display
Video
Audio Out
Recording
PCM
Dynamic Range Control
Clock
PCM 48kHz
DivX
96kHz
Dolby Digital
HDMI
DTS
Reset All
Your setting will be activated.
48kHz : If your amplifier/decoder is NOT compatible
with 96kHz PCM, select "48kHz". 96kHz sound
will be output in 48kHz.
96kHz : If your amplifier/decoder is compatible with
96kHz PCM, select "96kHz". 96kHz sound will
be output.
Note
When playing back disc with copyright protection
• Even if you select "96kHz", the sound will be down
sampled at 48kHz.
E7E7AUD_EN.indb 87 E7E7AUD_EN.indb 87
GENERAL SETTING
Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
C
Settings for Dolby Digital (Default : Stream)
Use [K / L] to select a setting, then press [ENTER].
General Setting
Playback
Display Parental Lock
Video Audio Out
Audio Out
Recording Dolby Digital Disc Menu Language
Dynamic Range Control
Clock Audio Language
PCM PCM
DivX Subtitle Language
Dolby Digital Stream
HDMI Angle Icon
DTS
Reset All Still Mode
Your setting will be activated.
PCM : Converts the Dolby Digital into PCM (2 channel).
When your amplifier/decoder is NOT
compatible with Dolby Digital, set to "PCM".
Stream : Outputs Dolby Digital signals
When your amplifier/decoder is compatible
with Dolby Digital, set to "Stream".
D
Settings for DTS (Default : OFF)
Select a setting using [K / L], then press [ENTER].
General Setting
Playback
Display Parental Lock
Video Audio Out Audio Out
Recording DTS Disc Menu Language
Dynamic Range Control
Clock Audio Language
ON
PCM
DivX Subtitle Language
Dolby Digital OFF
HDMI Angle Icon
DTS
Reset All Still Mode
Your setting is activated.
ON : Outputs DTS signals.
If your amplifier / decoder is compatible with
DTS, set to "ON".
OFF : No DTS signal is output.
If your amplifier / decoder is NOT compatible
with DTS, set to "OFF".
EN EN 87 87
2007/01/29 19:04:34 2007/01/29 19:04:34